A4518301600 Blower Motor for SMART Fortwo
Primary OE reference: A4518301600
Product type: Automotive HVAC Blower Motor
Applicable vehicle: SMART Fortwo
Brand: SMART
Model: Fortwo
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
A4518301600 Automotive Blower Motor Overview
Reference A4518301600 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6232-110, the A4518301600 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6232-110 when comparing this A4518301600 airflow configuration.
OE Reference and Application
The primary catalogue number is A4518301600. The recorded application is SMART Fortwo. For 6232-110, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6232-110 with the approved OE reference.
HVAC Interface and A4518301600 installation
During work on 6232-110, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6232-110 before the lower trim is closed.
For item 6232-110, confirm that the A4518301600 centrifugal wheel clears its housing and that the 6232-110 connector lock engages without force. After seating 6232-110, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6232-110.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | A4518301600 |
| Cross-reference numbers | A4518301600 |
| Vehicle brand | SMART |
| Vehicle model | Fortwo |
| Model year | Confirm by OE reference |
| A4518301600 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6232-110, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6232-110 record remains the picking reference.
For trade item 6232-110, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6232-110 on the packing instruction.
Frequently Asked Questions
How should item 6232-110 and blower number A4518301600 be verified?
Match 6232-110 to the complete A4518301600 marking, then compare the 6232-110 plug, terminal count, mounting flange and wheel dimensions with the removed SMART unit.
Can 6232-110 have more than one vehicle-side blower configuration?
Yes. SMART production changes can affect 6232-110; confirm steering position, climate-control specification and the original 6232-110 geometry before approval.
What circuit checks are useful when 6232-110 does not operate?
For 6232-110, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6232-110 motor again.
Which details should accompany a wholesale request for 6232-110?
Provide item 6232-110, OE A4518301600, the stated application, quantity and destination; add 6232-110 carton or private-label requirements separately.
How can noise be avoided after fitting 6232-110?
Clear debris from the air inlet, check that the 6232-110 wheel turns freely, seat the 6232-110 flange evenly and keep wiring away from the impeller.
Request a quote for 6232-110: Send A4518301600, the 6232-110 application and required quantity for a fitment and supply review.
