1504121 Blower Motor for FORD
Primary OE reference: 1504121
Cross-reference 1: 16241260-101
Cross-reference 2: 16241260-102
Cross-reference 3: 1800102
Cross-reference 4: 203142BSM
Cross-reference 5: 203364
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD
Brand: FORD
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
1504121 Automotive Blower Motor Overview
The 1504121 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6203-140, When the climate-control circuit commands 1504121 airflow, the electric motor rotates the 1504121 fan wheel inside the HVAC housing. Use 6203-140 when comparing this 1504121 airflow configuration.
OE Reference and Application
The primary catalogue number is 1504121. The recorded application is FORD. For 6203-140, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6203-140 with the approved OE reference.
HVAC Interface and 1504121 installation
During work on 6203-140, If 1504121 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 1504121 motor is the only cause. Recheck 6203-140 before the lower trim is closed.
For item 6203-140, confirm that the 1504121 centrifugal wheel clears its housing and that the 6203-140 connector lock engages without force. After seating 6203-140, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-140.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 1504121 |
| Cross-reference numbers | 16241260-101 / 16241260-102 / 1800102 / 203142BSM / 203364 |
| Vehicle brand | FORD |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 1504121 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-140, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-140 record remains the picking reference.
For trade item 6203-140, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6203-140 on the packing instruction.
Frequently Asked Questions
How should item 6203-140 and blower number 1504121 be verified?
Match 6203-140 to the complete 1504121 marking, then compare the 6203-140 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-140 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-140; confirm steering position, climate-control specification and the original 6203-140 geometry before approval.
What circuit checks are useful when 6203-140 does not operate?
For 6203-140, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-140 motor again.
Which details should accompany a wholesale request for 6203-140?
Provide item 6203-140, OE 1504121, the stated application, quantity and destination; add 6203-140 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-140?
Clear debris from the air inlet, check that the 6203-140 wheel turns freely, seat the 6203-140 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-140: Send 1504121, the 6203-140 application and required quantity for a fitment and supply review.
