1581701 Blower Motor for BUICK
Primary OE reference: 1581701
Cross-reference 1: 16241413-101
Cross-reference 2: 16241413-102
Cross-reference 3: 1800315
Cross-reference 4: 20958710
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK
Brand: BUICK
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
1581701 Automotive Blower Motor Overview
Reference 1581701 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6208-095, the 1581701 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6208-095 when comparing this 1581701 airflow configuration.
OE Reference and Application
The primary catalogue number is 1581701. The recorded application is BUICK. For 6208-095, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6208-095 with the approved OE reference.
HVAC Interface and 1581701 installation
During work on 6208-095, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6208-095 before the lower trim is closed.
For item 6208-095, confirm that the 1581701 centrifugal wheel clears its housing and that the 6208-095 connector lock engages without force. After seating 6208-095, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-095.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 1581701 |
| Cross-reference numbers | 16241413-101 / 16241413-102 / 1800315 / 20958710 |
| Vehicle brand | BUICK |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 1581701 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-095, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6208-095 record remains the picking reference.
For trade item 6208-095, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6208-095 on the packing instruction.
Frequently Asked Questions
How should item 6208-095 and blower number 1581701 be verified?
Match 6208-095 to the complete 1581701 marking, then compare the 6208-095 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-095 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-095; confirm steering position, climate-control specification and the original 6208-095 geometry before approval.
What circuit checks are useful when 6208-095 does not operate?
For 6208-095, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-095 motor again.
Which details should accompany a wholesale request for 6208-095?
Provide item 6208-095, OE 1581701, the stated application, quantity and destination; add 6208-095 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-095?
Clear debris from the air inlet, check that the 6208-095 wheel turns freely, seat the 6208-095 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-095: Send 1581701, the 6208-095 application and required quantity for a fitment and supply review.
