10348 Blower Motor for BUICK
Primary OE reference: 10348
Cross-reference 1: 2014762
Cross-reference 2: 2311697
Cross-reference 3: 26-14649
Cross-reference 4: 5179476AA
Cross-reference 5: 615-00100
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK
Brand: BUICK
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
10348 Automotive Blower Motor Overview
This listing links 10348 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6208-093, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6208-093 when comparing this 10348 airflow configuration.
OE Reference and Application
The primary catalogue number is 10348. The recorded application is BUICK. For 6208-093, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6208-093 with the approved OE reference.
HVAC Interface and 10348 installation
During work on 6208-093, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 10348 installation. Recheck 6208-093 before the lower trim is closed.
For item 6208-093, confirm that the 10348 centrifugal wheel clears its housing and that the 6208-093 connector lock engages without force. After seating 6208-093, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-093.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 10348 |
| Cross-reference numbers | 2014762 / 2311697 / 26-14649 / 5179476AA / 615-00100 |
| Vehicle brand | BUICK |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 10348 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-093, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-093 record remains the picking reference.
For trade item 6208-093, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6208-093 on the packing instruction.
Frequently Asked Questions
How should item 6208-093 and blower number 10348 be verified?
Match 6208-093 to the complete 10348 marking, then compare the 6208-093 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-093 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-093; confirm steering position, climate-control specification and the original 6208-093 geometry before approval.
What circuit checks are useful when 6208-093 does not operate?
For 6208-093, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-093 motor again.
Which details should accompany a wholesale request for 6208-093?
Provide item 6208-093, OE 10348, the stated application, quantity and destination; add 6208-093 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-093?
Clear debris from the air inlet, check that the 6208-093 wheel turns freely, seat the 6208-093 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-093: Send 10348, the 6208-093 application and required quantity for a fitment and supply review.
