10340 Blower Motor for BUICK
Primary OE reference: 10340
Cross-reference 1: 1580474
Cross-reference 2: 1581085
Cross-reference 3: 1581096
Cross-reference 4: 158622
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK
Brand: BUICK
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
10340 Automotive Blower Motor Overview
Reference 10340 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6208-090, the 10340 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6208-090 when comparing this 10340 airflow configuration.
OE Reference and Application
The primary catalogue number is 10340. The recorded application is BUICK. For 6208-090, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6208-090 with the approved OE reference.
HVAC Interface and 10340 installation
During work on 6208-090, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6208-090 before the lower trim is closed.
For item 6208-090, confirm that the 10340 centrifugal wheel clears its housing and that the 6208-090 connector lock engages without force. After seating 6208-090, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-090.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 10340 |
| Cross-reference numbers | 1580474 / 1581085 / 1581096 / 158622 |
| Vehicle brand | BUICK |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 10340 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-090, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-090 record remains the picking reference.
For trade item 6208-090, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6208-090 on the packing instruction.
Frequently Asked Questions
How should item 6208-090 and blower number 10340 be verified?
Match 6208-090 to the complete 10340 marking, then compare the 6208-090 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-090 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-090; confirm steering position, climate-control specification and the original 6208-090 geometry before approval.
What circuit checks are useful when 6208-090 does not operate?
For 6208-090, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-090 motor again.
Which details should accompany a wholesale request for 6208-090?
Provide item 6208-090, OE 10340, the stated application, quantity and destination; add 6208-090 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-090?
Clear debris from the air inlet, check that the 6208-090 wheel turns freely, seat the 6208-090 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-090: Send 10340, the 6208-090 application and required quantity for a fitment and supply review.
