15-80185 Blower Motor for BUICK Rainier
Primary OE reference: 15-80185
Cross-reference 1: 15-81130
Cross-reference 2: 2015215
Cross-reference 3: 2311606
Cross-reference 4: 26-13953
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK Rainier
Brand: BUICK
Model: Rainier
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
15-80185 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 15-80185 together with the 15-80185 product images and vehicle data on this page.
For catalogue item 6208-089, the 15-80185 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6208-089 when comparing this 15-80185 airflow configuration.
OE Reference and Application
The primary catalogue number is 15-80185. The recorded application is BUICK Rainier. For 6208-089, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6208-089 with the approved OE reference.
HVAC Interface and 15-80185 installation
During work on 6208-089, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6208-089 before the lower trim is closed.
For item 6208-089, confirm that the 15-80185 centrifugal wheel clears its housing and that the 6208-089 connector lock engages without force. After seating 6208-089, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-089.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 15-80185 |
| Cross-reference numbers | 15-81130 / 2015215 / 2311606 / 26-13953 |
| Vehicle brand | BUICK |
| Vehicle model | Rainier |
| Model year | Confirm by OE reference |
| 15-80185 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-089, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6208-089 record remains the picking reference.
For trade item 6208-089, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6208-089 on the packing instruction.
Frequently Asked Questions
How should item 6208-089 and blower number 15-80185 be verified?
Match 6208-089 to the complete 15-80185 marking, then compare the 6208-089 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-089 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-089; confirm steering position, climate-control specification and the original 6208-089 geometry before approval.
What circuit checks are useful when 6208-089 does not operate?
For 6208-089, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-089 motor again.
Which details should accompany a wholesale request for 6208-089?
Provide item 6208-089, OE 15-80185, the stated application, quantity and destination; add 6208-089 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-089?
Clear debris from the air inlet, check that the 6208-089 wheel turns freely, seat the 6208-089 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-089: Send 15-80185, the 6208-089 application and required quantity for a fitment and supply review.
