76802 Blower Motor for BUICK
Primary OE reference: 76802
Cross-reference 1: 13521273
Cross-reference 2: PM9509
Cross-reference 3: 13503306
Cross-reference 4: 13584653
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK
Brand: BUICK
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
76802 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 76802 for application-led sourcing.
For catalogue item 6208-088, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6208-088 when comparing this 76802 airflow configuration.
OE Reference and Application
The primary catalogue number is 76802. The recorded application is BUICK. For 6208-088, Measure the 76802 wheel height and outer diameter, then compare the electrical socket and base contour with the 76802 product photos. Record 6208-088 with the approved OE reference.
HVAC Interface and 76802 installation
During work on 6208-088, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 76802 installation. Recheck 6208-088 before the lower trim is closed.
For item 6208-088, confirm that the 76802 centrifugal wheel clears its housing and that the 6208-088 connector lock engages without force. After seating 6208-088, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-088.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 76802 |
| Cross-reference numbers | 13521273 / PM9509 / 13503306 / 13584653 |
| Vehicle brand | BUICK |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 76802 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-088, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6208-088 record remains the picking reference.
For trade item 6208-088, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6208-088 on the packing instruction.
Frequently Asked Questions
How should item 6208-088 and blower number 76802 be verified?
Match 6208-088 to the complete 76802 marking, then compare the 6208-088 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-088 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-088; confirm steering position, climate-control specification and the original 6208-088 geometry before approval.
What circuit checks are useful when 6208-088 does not operate?
For 6208-088, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-088 motor again.
Which details should accompany a wholesale request for 6208-088?
Provide item 6208-088, OE 76802, the stated application, quantity and destination; add 6208-088 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-088?
Clear debris from the air inlet, check that the 6208-088 wheel turns freely, seat the 6208-088 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-088: Send 76802, the 6208-088 application and required quantity for a fitment and supply review.
