BM00238C Blower Motor for BUICK
Primary OE reference: BM00238C
Cross-reference 1: 19131217
Cross-reference 2: 700157
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK
Brand: BUICK
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
BM00238C Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use BM00238C together with the BM00238C product images and vehicle data on this page.
For catalogue item 6208-086, the BM00238C blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6208-086 when comparing this BM00238C airflow configuration.
OE Reference and Application
The primary catalogue number is BM00238C. The recorded application is BUICK. For 6208-086, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6208-086 with the approved OE reference.
HVAC Interface and BM00238C installation
During work on 6208-086, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6208-086 before the lower trim is closed.
For item 6208-086, confirm that the BM00238C centrifugal wheel clears its housing and that the 6208-086 connector lock engages without force. After seating 6208-086, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-086.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | BM00238C |
| Cross-reference numbers | 19131217 / 700157 |
| Vehicle brand | BUICK |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| BM00238C installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-086, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6208-086 record remains the picking reference.
For trade item 6208-086, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6208-086 on the packing instruction.
Frequently Asked Questions
How should item 6208-086 and blower number BM00238C be verified?
Match 6208-086 to the complete BM00238C marking, then compare the 6208-086 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-086 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-086; confirm steering position, climate-control specification and the original 6208-086 geometry before approval.
What circuit checks are useful when 6208-086 does not operate?
For 6208-086, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-086 motor again.
Which details should accompany a wholesale request for 6208-086?
Provide item 6208-086, OE BM00238C, the stated application, quantity and destination; add 6208-086 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-086?
Clear debris from the air inlet, check that the 6208-086 wheel turns freely, seat the 6208-086 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-086: Send BM00238C, the 6208-086 application and required quantity for a fitment and supply review.
