2Q1.819.021.A Blower Motor for VOLKSWAGEN Polo
Primary OE reference: 2Q1.819.021.A
Cross-reference 1: T44206C
Cross-reference 2: T27449B
Cross-reference 3: RC530134
Product type: Automotive HVAC Blower Motor
Applicable vehicle: VOLKSWAGEN Polo
Brand: VOLKSWAGEN
Model: Polo
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
2Q1.819.021.A Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 2Q1.819.021.A to support OE-number comparison before purchase.
For catalogue item 6220-082, Cabin 2Q1.819.021.A airflow depends on the 2Q1.819.021.A motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6220-082 when comparing this 2Q1.819.021.A airflow configuration.
OE Reference and Application
The primary catalogue number is 2Q1.819.021.A. The recorded application is VOLKSWAGEN Polo. For 6220-082, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6220-082 with the approved OE reference.
HVAC Interface and 2Q1.819.021.A installation
During work on 6220-082, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6220-082 before the lower trim is closed.
For item 6220-082, confirm that the 2Q1.819.021.A centrifugal wheel clears its housing and that the 6220-082 connector lock engages without force. After seating 6220-082, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6220-082.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 2Q1.819.021.A |
| Cross-reference numbers | T44206C / T27449B / RC530134 |
| Vehicle brand | VOLKSWAGEN |
| Vehicle model | Polo |
| Model year | Confirm by OE reference |
| 2Q1.819.021.A installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6220-082, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6220-082 record remains the picking reference.
For trade item 6220-082, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6220-082 on the packing instruction.
Frequently Asked Questions
How should item 6220-082 and blower number 2Q1.819.021.A be verified?
Match 6220-082 to the complete 2Q1.819.021.A marking, then compare the 6220-082 plug, terminal count, mounting flange and wheel dimensions with the removed VOLKSWAGEN unit.
Can 6220-082 have more than one vehicle-side blower configuration?
Yes. VOLKSWAGEN production changes can affect 6220-082; confirm steering position, climate-control specification and the original 6220-082 geometry before approval.
What circuit checks are useful when 6220-082 does not operate?
For 6220-082, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6220-082 motor again.
Which details should accompany a wholesale request for 6220-082?
Provide item 6220-082, OE 2Q1.819.021.A, the stated application, quantity and destination; add 6220-082 carton or private-label requirements separately.
How can noise be avoided after fitting 6220-082?
Clear debris from the air inlet, check that the 6220-082 wheel turns freely, seat the 6220-082 flange evenly and keep wiring away from the impeller.
Request a quote for 6220-082: Send 2Q1.819.021.A, the 6220-082 application and required quantity for a fitment and supply review.
