39220106 Blower Motor for BUICK
Primary OE reference: 39220106
Cross-reference 1: 39027941
Cross-reference 2: 1581936
Cross-reference 3: 39146850
Cross-reference 4: BM10111C
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK
Brand: BUICK
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
39220106 Automotive Blower Motor Overview
This listing links 39220106 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6208-084, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6208-084 when comparing this 39220106 airflow configuration.
OE Reference and Application
The primary catalogue number is 39220106. The recorded application is BUICK. For 6208-084, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6208-084 with the approved OE reference.
HVAC Interface and 39220106 installation
During work on 6208-084, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 39220106 installation. Recheck 6208-084 before the lower trim is closed.
For item 6208-084, confirm that the 39220106 centrifugal wheel clears its housing and that the 6208-084 connector lock engages without force. After seating 6208-084, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-084.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 39220106 |
| Cross-reference numbers | 39027941 / 1581936 / 39146850 / BM10111C |
| Vehicle brand | BUICK |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 39220106 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-084, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6208-084 record remains the picking reference.
For trade item 6208-084, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6208-084 on the packing instruction.
Frequently Asked Questions
How should item 6208-084 and blower number 39220106 be verified?
Match 6208-084 to the complete 39220106 marking, then compare the 6208-084 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-084 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-084; confirm steering position, climate-control specification and the original 6208-084 geometry before approval.
What circuit checks are useful when 6208-084 does not operate?
For 6208-084, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-084 motor again.
Which details should accompany a wholesale request for 6208-084?
Provide item 6208-084, OE 39220106, the stated application, quantity and destination; add 6208-084 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-084?
Clear debris from the air inlet, check that the 6208-084 wheel turns freely, seat the 6208-084 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-084: Send 39220106, the 6208-084 application and required quantity for a fitment and supply review.
