HB111DN8202 Blower Motor for MAZDA
Primary OE reference: HB111DN8202
Cross-reference 1: HB111DN2802
Cross-reference 2: HB111GMK900
Cross-reference 3: 8727006430
Cross-reference 4: 8727005740
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA
Brand: MAZDA
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
HB111DN8202 Automotive Blower Motor Overview
This product entry documents the HB111DN8202 blower unit with practical identification and HB111DN8202 installation checkpoints.
For catalogue item 6206-035, Stable wheel rotation helps distribute air without relying on vehicle speed, making the HB111DN8202 blower important at idle and in traffic. Use 6206-035 when comparing this HB111DN8202 airflow configuration.
OE Reference and Application
The primary catalogue number is HB111DN8202. The recorded application is MAZDA. For 6206-035, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6206-035 with the approved OE reference.
HVAC Interface and HB111DN8202 installation
During work on 6206-035, After HB111DN8202 installation, operate low through high speed and confirm HB111DN8202 airflow reaches the selected vents without abnormal vibration. Recheck 6206-035 before the lower trim is closed.
For item 6206-035, confirm that the HB111DN8202 centrifugal wheel clears its housing and that the 6206-035 connector lock engages without force. After seating 6206-035, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-035.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | HB111DN8202 |
| Cross-reference numbers | HB111DN2802 / HB111GMK900 / 8727006430 / 8727005740 |
| Vehicle brand | MAZDA |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| HB111DN8202 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-035, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6206-035 record remains the picking reference.
For trade item 6206-035, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6206-035 on the packing instruction.
Frequently Asked Questions
How should item 6206-035 and blower number HB111DN8202 be verified?
Match 6206-035 to the complete HB111DN8202 marking, then compare the 6206-035 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-035 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-035; confirm steering position, climate-control specification and the original 6206-035 geometry before approval.
What circuit checks are useful when 6206-035 does not operate?
For 6206-035, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-035 motor again.
Which details should accompany a wholesale request for 6206-035?
Provide item 6206-035, OE HB111DN8202, the stated application, quantity and destination; add 6206-035 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-035?
Clear debris from the air inlet, check that the 6206-035 wheel turns freely, seat the 6206-035 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-035: Send HB111DN8202, the 6206-035 application and required quantity for a fitment and supply review.
