3511004 Blower Motor for KIA
Primary OE reference: 3511004
Cross-reference 1: 971111W080
Cross-reference 2: V52030009
Cross-reference 3: 971132P700
Cross-reference 4: 971263Z900
Cross-reference 5: 715094
Cross-reference 6: 05991182
Cross-reference 7: 34293
Product type: Automotive HVAC Blower Motor
Applicable vehicle: KIA
Brand: KIA
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
3511004 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 3511004 to support OE-number comparison before purchase.
For catalogue item 6201-047, Cabin 3511004 airflow depends on the 3511004 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6201-047 when comparing this 3511004 airflow configuration.
OE Reference and Application
The primary catalogue number is 3511004. The recorded application is KIA. For 6201-047, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6201-047 with the approved OE reference.
HVAC Interface and 3511004 installation
During work on 6201-047, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6201-047 before the lower trim is closed.
For item 6201-047, confirm that the 3511004 centrifugal wheel clears its housing and that the 6201-047 connector lock engages without force. After seating 6201-047, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-047.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 3511004 |
| Cross-reference numbers | 971111W080 / V52030009 / 971132P700 / 971263Z900 / 715094 / 05991182 / 34293 |
| Vehicle brand | KIA |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 3511004 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6201-047, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6201-047 record remains the picking reference.
For trade item 6201-047, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6201-047 on the packing instruction.
Frequently Asked Questions
How should item 6201-047 and blower number 3511004 be verified?
Match 6201-047 to the complete 3511004 marking, then compare the 6201-047 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.
Can 6201-047 have more than one vehicle-side blower configuration?
Yes. KIA production changes can affect 6201-047; confirm steering position, climate-control specification and the original 6201-047 geometry before approval.
What circuit checks are useful when 6201-047 does not operate?
For 6201-047, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-047 motor again.
Which details should accompany a wholesale request for 6201-047?
Provide item 6201-047, OE 3511004, the stated application, quantity and destination; add 6201-047 carton or private-label requirements separately.
How can noise be avoided after fitting 6201-047?
Clear debris from the air inlet, check that the 6201-047 wheel turns freely, seat the 6201-047 flange evenly and keep wiring away from the impeller.
Request a quote for 6201-047: Send 3511004, the 6201-047 application and required quantity for a fitment and supply review.
