8EW009158371 Blower Motor for PEUGEOT 206
Primary OE reference: 8EW009158371
Cross-reference 1: 6441J8
Cross-reference 2: 87744
Cross-reference 3: 6441R1
Cross-reference 4: PE8388
Product type: Automotive HVAC Blower Motor
Applicable vehicle: PEUGEOT 206
Brand: PEUGEOT
Model: 206
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
8EW009158371 Automotive Blower Motor Overview
This product entry documents the 8EW009158371 blower unit with practical identification and 8EW009158371 installation checkpoints.
For catalogue item 6204-082, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 8EW009158371 blower important at idle and in traffic. Use 6204-082 when comparing this 8EW009158371 airflow configuration.
OE Reference and Application
The primary catalogue number is 8EW009158371. The recorded application is PEUGEOT 206. For 6204-082, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6204-082 with the approved OE reference.
HVAC Interface and 8EW009158371 installation
During work on 6204-082, After 8EW009158371 installation, operate low through high speed and confirm 8EW009158371 airflow reaches the selected vents without abnormal vibration. Recheck 6204-082 before the lower trim is closed.
For item 6204-082, confirm that the 8EW009158371 centrifugal wheel clears its housing and that the 6204-082 connector lock engages without force. After seating 6204-082, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-082.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 8EW009158371 |
| Cross-reference numbers | 6441J8 / 87744 / 6441R1 / PE8388 |
| Vehicle brand | PEUGEOT |
| Vehicle model | 206 |
| Model year | Confirm by OE reference |
| 8EW009158371 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6204-082, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6204-082 record remains the picking reference.
For trade item 6204-082, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6204-082 on the packing instruction.
Frequently Asked Questions
How should item 6204-082 and blower number 8EW009158371 be verified?
Match 6204-082 to the complete 8EW009158371 marking, then compare the 6204-082 plug, terminal count, mounting flange and wheel dimensions with the removed PEUGEOT unit.
Can 6204-082 have more than one vehicle-side blower configuration?
Yes. PEUGEOT production changes can affect 6204-082; confirm steering position, climate-control specification and the original 6204-082 geometry before approval.
What circuit checks are useful when 6204-082 does not operate?
For 6204-082, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-082 motor again.
Which details should accompany a wholesale request for 6204-082?
Provide item 6204-082, OE 8EW009158371, the stated application, quantity and destination; add 6204-082 carton or private-label requirements separately.
How can noise be avoided after fitting 6204-082?
Clear debris from the air inlet, check that the 6204-082 wheel turns freely, seat the 6204-082 flange evenly and keep wiring away from the impeller.
Request a quote for 6204-082: Send 8EW009158371, the 6204-082 application and required quantity for a fitment and supply review.
