RC530087 Blower Motor for FORD
Primary OE reference: RC530087
Cross-reference 1: TR330046
Cross-reference 2: F006B10067
Cross-reference 3: 45656812
Cross-reference 4: F006B10415
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD
Brand: FORD
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
RC530087 Automotive Blower Motor Overview
This product entry documents the RC530087 blower unit with practical identification and RC530087 installation checkpoints.
For catalogue item 6203-110, Stable wheel rotation helps distribute air without relying on vehicle speed, making the RC530087 blower important at idle and in traffic. Use 6203-110 when comparing this RC530087 airflow configuration.
OE Reference and Application
The primary catalogue number is RC530087. The recorded application is FORD. For 6203-110, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6203-110 with the approved OE reference.
HVAC Interface and RC530087 installation
During work on 6203-110, After RC530087 installation, operate low through high speed and confirm RC530087 airflow reaches the selected vents without abnormal vibration. Recheck 6203-110 before the lower trim is closed.
For item 6203-110, confirm that the RC530087 centrifugal wheel clears its housing and that the 6203-110 connector lock engages without force. After seating 6203-110, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-110.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | RC530087 |
| Cross-reference numbers | TR330046 / F006B10067 / 45656812 / F006B10415 |
| Vehicle brand | FORD |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| RC530087 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-110, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-110 record remains the picking reference.
For trade item 6203-110, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6203-110 on the packing instruction.
Frequently Asked Questions
How should item 6203-110 and blower number RC530087 be verified?
Match 6203-110 to the complete RC530087 marking, then compare the 6203-110 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-110 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-110; confirm steering position, climate-control specification and the original 6203-110 geometry before approval.
What circuit checks are useful when 6203-110 does not operate?
For 6203-110, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-110 motor again.
Which details should accompany a wholesale request for 6203-110?
Provide item 6203-110, OE RC530087, the stated application, quantity and destination; add 6203-110 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-110?
Clear debris from the air inlet, check that the 6203-110 wheel turns freely, seat the 6203-110 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-110: Send RC530087, the 6203-110 application and required quantity for a fitment and supply review.
