87788 Blower Motor for FIAT
Primary OE reference: 87788
Cross-reference 1: 87804
Cross-reference 2: 77362402
Cross-reference 3: 694125250
Cross-reference 4: DEA09031
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FIAT
Brand: FIAT
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
87788 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 87788 together with the 87788 product images and vehicle data on this page.
For catalogue item 6219-045, the 87788 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6219-045 when comparing this 87788 airflow configuration.
OE Reference and Application
The primary catalogue number is 87788. The recorded application is FIAT. For 6219-045, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6219-045 with the approved OE reference.
HVAC Interface and 87788 installation
During work on 6219-045, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6219-045 before the lower trim is closed.
For item 6219-045, confirm that the 87788 centrifugal wheel clears its housing and that the 6219-045 connector lock engages without force. After seating 6219-045, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6219-045.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 87788 |
| Cross-reference numbers | 87804 / 77362402 / 694125250 / DEA09031 |
| Vehicle brand | FIAT |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 87788 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6219-045, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6219-045 record remains the picking reference.
For trade item 6219-045, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6219-045 on the packing instruction.
Frequently Asked Questions
How should item 6219-045 and blower number 87788 be verified?
Match 6219-045 to the complete 87788 marking, then compare the 6219-045 plug, terminal count, mounting flange and wheel dimensions with the removed FIAT unit.
Can 6219-045 have more than one vehicle-side blower configuration?
Yes. FIAT production changes can affect 6219-045; confirm steering position, climate-control specification and the original 6219-045 geometry before approval.
What circuit checks are useful when 6219-045 does not operate?
For 6219-045, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6219-045 motor again.
Which details should accompany a wholesale request for 6219-045?
Provide item 6219-045, OE 87788, the stated application, quantity and destination; add 6219-045 carton or private-label requirements separately.
How can noise be avoided after fitting 6219-045?
Clear debris from the air inlet, check that the 6219-045 wheel turns freely, seat the 6219-045 flange evenly and keep wiring away from the impeller.
Request a quote for 6219-045: Send 87788, the 6219-045 application and required quantity for a fitment and supply review.
