NE5161B10 Blower Motor for MAZDA
Primary OE reference: NE5161B10
Cross-reference 1: 76979
Cross-reference 2: 700311
Cross-reference 3: 2311915
Cross-reference 4: 6552704
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA
Brand: MAZDA
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
NE5161B10 Automotive Blower Motor Overview
YoonShan catalogues NE5161B10 as an HVAC NE5161B10 airflow component for workshops, distributors and export buyers.
For catalogue item 6206-033, When the climate-control circuit commands NE5161B10 airflow, the electric motor rotates the NE5161B10 fan wheel inside the HVAC housing. Use 6206-033 when comparing this NE5161B10 airflow configuration.
OE Reference and Application
The primary catalogue number is NE5161B10. The recorded application is MAZDA. For 6206-033, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed MAZDA unit. Record 6206-033 with the approved OE reference.
HVAC Interface and NE5161B10 installation
During work on 6206-033, If NE5161B10 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the NE5161B10 motor is the only cause. Recheck 6206-033 before the lower trim is closed.
For item 6206-033, confirm that the NE5161B10 centrifugal wheel clears its housing and that the 6206-033 connector lock engages without force. After seating 6206-033, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-033.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | NE5161B10 |
| Cross-reference numbers | 76979 / 700311 / 2311915 / 6552704 |
| Vehicle brand | MAZDA |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| NE5161B10 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-033, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6206-033 record remains the picking reference.
For trade item 6206-033, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6206-033 on the packing instruction.
Frequently Asked Questions
How should item 6206-033 and blower number NE5161B10 be verified?
Match 6206-033 to the complete NE5161B10 marking, then compare the 6206-033 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-033 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-033; confirm steering position, climate-control specification and the original 6206-033 geometry before approval.
What circuit checks are useful when 6206-033 does not operate?
For 6206-033, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-033 motor again.
Which details should accompany a wholesale request for 6206-033?
Provide item 6206-033, OE NE5161B10, the stated application, quantity and destination; add 6206-033 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-033?
Clear debris from the air inlet, check that the 6206-033 wheel turns freely, seat the 6206-033 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-033: Send NE5161B10, the 6206-033 application and required quantity for a fitment and supply review.
