RH-60-004E-S Blower Motor for MITSUBISHI
Primary OE reference: RH-60-004E-S
Cross-reference 1: 700040
Cross-reference 2: 79310SX0003
Cross-reference 3: 194000-7085
Cross-reference 4: MR315962
Cross-reference 5: 194000-7161
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MITSUBISHI
Brand: MITSUBISHI
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
RH-60-004E-S Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use RH-60-004E-S together with the RH-60-004E-S product images and vehicle data on this page.
For catalogue item 6207-087, the RH-60-004E-S blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6207-087 when comparing this RH-60-004E-S airflow configuration.
OE Reference and Application
The primary catalogue number is RH-60-004E-S. The recorded application is MITSUBISHI. For 6207-087, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6207-087 with the approved OE reference.
HVAC Interface and RH-60-004E-S installation
During work on 6207-087, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6207-087 before the lower trim is closed.
For item 6207-087, confirm that the RH-60-004E-S centrifugal wheel clears its housing and that the 6207-087 connector lock engages without force. After seating 6207-087, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-087.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | RH-60-004E-S |
| Cross-reference numbers | 700040 / 79310SX0003 / 194000-7085 / MR315962 / 194000-7161 |
| Vehicle brand | MITSUBISHI |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| RH-60-004E-S installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-087, Packing preparation accounts for the RH-60-004E-S motor weight and wheel shape to reduce movement inside the carton. The 6207-087 record remains the picking reference.
For trade item 6207-087, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6207-087 on the packing instruction.
Frequently Asked Questions
How should item 6207-087 and blower number RH-60-004E-S be verified?
Match 6207-087 to the complete RH-60-004E-S marking, then compare the 6207-087 plug, terminal count, mounting flange and wheel dimensions with the removed MITSUBISHI unit.
Can 6207-087 have more than one vehicle-side blower configuration?
Yes. MITSUBISHI production changes can affect 6207-087; confirm steering position, climate-control specification and the original 6207-087 geometry before approval.
What circuit checks are useful when 6207-087 does not operate?
For 6207-087, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-087 motor again.
Which details should accompany a wholesale request for 6207-087?
Provide item 6207-087, OE RH-60-004E-S, the stated application, quantity and destination; add 6207-087 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-087?
Clear debris from the air inlet, check that the 6207-087 wheel turns freely, seat the 6207-087 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-087: Send RH-60-004E-S, the 6207-087 application and required quantity for a fitment and supply review.
