7802A310 Blower Motor for MITSUBISHI L200
Primary OE reference: 7802A310
Cross-reference 1: CSA431D240
Cross-reference 2: CSA432B019
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MITSUBISHI L200
Brand: MITSUBISHI
Model: L200
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
7802A310 Automotive Blower Motor Overview
This product entry documents the 7802A310 blower unit with practical identification and 7802A310 installation checkpoints.
For catalogue item 6215-037, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 7802A310 blower important at idle and in traffic. Use 6215-037 when comparing this 7802A310 airflow configuration.
OE Reference and Application
The primary catalogue number is 7802A310. The recorded application is MITSUBISHI L200. For 6215-037, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6215-037 with the approved OE reference.
HVAC Interface and 7802A310 installation
During work on 6215-037, After 7802A310 installation, operate low through high speed and confirm 7802A310 airflow reaches the selected vents without abnormal vibration. Recheck 6215-037 before the lower trim is closed.
For item 6215-037, confirm that the 7802A310 centrifugal wheel clears its housing and that the 6215-037 connector lock engages without force. After seating 6215-037, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6215-037.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 7802A310 |
| Cross-reference numbers | CSA431D240 / CSA432B019 |
| Vehicle brand | MITSUBISHI |
| Vehicle model | L200 |
| Model year | Confirm by OE reference |
| 7802A310 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6215-037, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6215-037 record remains the picking reference.
For trade item 6215-037, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6215-037 on the packing instruction.
Frequently Asked Questions
How should item 6215-037 and blower number 7802A310 be verified?
Match 6215-037 to the complete 7802A310 marking, then compare the 6215-037 plug, terminal count, mounting flange and wheel dimensions with the removed MITSUBISHI unit.
Can 6215-037 have more than one vehicle-side blower configuration?
Yes. MITSUBISHI production changes can affect 6215-037; confirm steering position, climate-control specification and the original 6215-037 geometry before approval.
What circuit checks are useful when 6215-037 does not operate?
For 6215-037, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6215-037 motor again.
Which details should accompany a wholesale request for 6215-037?
Provide item 6215-037, OE 7802A310, the stated application, quantity and destination; add 6215-037 carton or private-label requirements separately.
How can noise be avoided after fitting 6215-037?
Clear debris from the air inlet, check that the 6215-037 wheel turns freely, seat the 6215-037 flange evenly and keep wiring away from the impeller.
Request a quote for 6215-037: Send 7802A310, the 6215-037 application and required quantity for a fitment and supply review.
