C10061B10A Blower Motor for MAZDA
Primary OE reference: C10061B10A
Cross-reference 1: 8940000202
Cross-reference 2: GE4T61B10A
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA
Brand: MAZDA
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
C10061B10A Automotive Blower Motor Overview
This product entry documents the C10061B10A blower unit with practical identification and C10061B10A installation checkpoints.
For catalogue item 6206-031, Stable wheel rotation helps distribute air without relying on vehicle speed, making the C10061B10A blower important at idle and in traffic. Use 6206-031 when comparing this C10061B10A airflow configuration.
OE Reference and Application
The primary catalogue number is C10061B10A. The recorded application is MAZDA. For 6206-031, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6206-031 with the approved OE reference.
HVAC Interface and C10061B10A installation
During work on 6206-031, After C10061B10A installation, operate low through high speed and confirm C10061B10A airflow reaches the selected vents without abnormal vibration. Recheck 6206-031 before the lower trim is closed.
For item 6206-031, confirm that the C10061B10A centrifugal wheel clears its housing and that the 6206-031 connector lock engages without force. After seating 6206-031, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-031.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | C10061B10A |
| Cross-reference numbers | 8940000202 / GE4T61B10A |
| Vehicle brand | MAZDA |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| C10061B10A installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-031, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6206-031 record remains the picking reference.
For trade item 6206-031, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6206-031 on the packing instruction.
Frequently Asked Questions
How should item 6206-031 and blower number C10061B10A be verified?
Match 6206-031 to the complete C10061B10A marking, then compare the 6206-031 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-031 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-031; confirm steering position, climate-control specification and the original 6206-031 geometry before approval.
What circuit checks are useful when 6206-031 does not operate?
For 6206-031, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-031 motor again.
Which details should accompany a wholesale request for 6206-031?
Provide item 6206-031, OE C10061B10A, the stated application, quantity and destination; add 6206-031 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-031?
Clear debris from the air inlet, check that the 6206-031 wheel turns freely, seat the 6206-031 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-031: Send C10061B10A, the 6206-031 application and required quantity for a fitment and supply review.
