2K00030352 Blower Motor for NISSAN
Primary OE reference: 2K00030352
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN
Brand: NISSAN
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
2K00030352 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 2K00030352 to support OE-number comparison before purchase.
For catalogue item 6205-094, Cabin 2K00030352 airflow depends on the 2K00030352 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6205-094 when comparing this 2K00030352 airflow configuration.
OE Reference and Application
The primary catalogue number is 2K00030352. The recorded application is NISSAN. For 6205-094, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6205-094 with the approved OE reference.
HVAC Interface and 2K00030352 installation
During work on 6205-094, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6205-094 before the lower trim is closed.
For item 6205-094, confirm that the 2K00030352 centrifugal wheel clears its housing and that the 6205-094 connector lock engages without force. After seating 6205-094, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-094.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 2K00030352 |
| Cross-reference numbers | 2K00030352 |
| Vehicle brand | NISSAN |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 2K00030352 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-094, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-094 record remains the picking reference.
For trade item 6205-094, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6205-094 on the packing instruction.
Frequently Asked Questions
How should item 6205-094 and blower number 2K00030352 be verified?
Match 6205-094 to the complete 2K00030352 marking, then compare the 6205-094 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-094 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-094; confirm steering position, climate-control specification and the original 6205-094 geometry before approval.
What circuit checks are useful when 6205-094 does not operate?
For 6205-094, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-094 motor again.
Which details should accompany a wholesale request for 6205-094?
Provide item 6205-094, OE 2K00030352, the stated application, quantity and destination; add 6205-094 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-094?
Clear debris from the air inlet, check that the 6205-094 wheel turns freely, seat the 6205-094 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-094: Send 2K00030352, the 6205-094 application and required quantity for a fitment and supply review.
