272258H310 Blower Motor for NISSAN X-Trail
Primary OE reference: 272258H310
Cross-reference 1: 272258H300
Cross-reference 2: 272258H30B
Cross-reference 3: 272254M410
Cross-reference 4: 272304M400
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN X-Trail
Brand: NISSAN
Model: X-Trail
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
272258H310 Automotive Blower Motor Overview
This listing links 272258H310 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6205-091, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6205-091 when comparing this 272258H310 airflow configuration.
OE Reference and Application
The primary catalogue number is 272258H310. The recorded application is NISSAN X-Trail. For 6205-091, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6205-091 with the approved OE reference.
HVAC Interface and 272258H310 installation
During work on 6205-091, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 272258H310 installation. Recheck 6205-091 before the lower trim is closed.
For item 6205-091, confirm that the 272258H310 centrifugal wheel clears its housing and that the 6205-091 connector lock engages without force. After seating 6205-091, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-091.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 272258H310 |
| Cross-reference numbers | 272258H300 / 272258H30B / 272254M410 / 272304M400 |
| Vehicle brand | NISSAN |
| Vehicle model | X-Trail |
| Model year | Confirm by OE reference |
| 272258H310 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-091, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-091 record remains the picking reference.
For trade item 6205-091, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6205-091 on the packing instruction.
Frequently Asked Questions
How should item 6205-091 and blower number 272258H310 be verified?
Match 6205-091 to the complete 272258H310 marking, then compare the 6205-091 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-091 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-091; confirm steering position, climate-control specification and the original 6205-091 geometry before approval.
What circuit checks are useful when 6205-091 does not operate?
For 6205-091, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-091 motor again.
Which details should accompany a wholesale request for 6205-091?
Provide item 6205-091, OE 272258H310, the stated application, quantity and destination; add 6205-091 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-091?
Clear debris from the air inlet, check that the 6205-091 wheel turns freely, seat the 6205-091 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-091: Send 272258H310, the 6205-091 application and required quantity for a fitment and supply review.
