272259H600 Blower Motor for NISSAN X-Trail
Primary OE reference: 272259H600
Cross-reference 1: 272259H60B
Cross-reference 2: 272259H60A
Cross-reference 3: 272258H90B
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN X-Trail
Brand: NISSAN
Model: X-Trail
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
272259H600 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 272259H600 together with the 272259H600 product images and vehicle data on this page.
For catalogue item 6205-090, the 272259H600 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-090 when comparing this 272259H600 airflow configuration.
OE Reference and Application
The primary catalogue number is 272259H600. The recorded application is NISSAN X-Trail. For 6205-090, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6205-090 with the approved OE reference.
HVAC Interface and 272259H600 installation
During work on 6205-090, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-090 before the lower trim is closed.
For item 6205-090, confirm that the 272259H600 centrifugal wheel clears its housing and that the 6205-090 connector lock engages without force. After seating 6205-090, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-090.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 272259H600 |
| Cross-reference numbers | 272259H60B / 272259H60A / 272258H90B |
| Vehicle brand | NISSAN |
| Vehicle model | X-Trail |
| Model year | Confirm by OE reference |
| 272259H600 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-090, Packing preparation accounts for the 272259H600 motor weight and wheel shape to reduce movement inside the carton. The 6205-090 record remains the picking reference.
For trade item 6205-090, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6205-090 on the packing instruction.
Frequently Asked Questions
How should item 6205-090 and blower number 272259H600 be verified?
Match 6205-090 to the complete 272259H600 marking, then compare the 6205-090 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-090 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-090; confirm steering position, climate-control specification and the original 6205-090 geometry before approval.
What circuit checks are useful when 6205-090 does not operate?
For 6205-090, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-090 motor again.
Which details should accompany a wholesale request for 6205-090?
Provide item 6205-090, OE 272259H600, the stated application, quantity and destination; add 6205-090 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-090?
Clear debris from the air inlet, check that the 6205-090 wheel turns freely, seat the 6205-090 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-090: Send 272259H600, the 6205-090 application and required quantity for a fitment and supply review.
