7802A348 Blower Motor for MITSUBISHI Outlander
Primary OE reference: 7802A348
Cross-reference 1: CSZ431D252
Cross-reference 2: 7800A519
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MITSUBISHI Outlander
Brand: MITSUBISHI
Model: Outlander
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
7802A348 Automotive Blower Motor Overview
The 7802A348 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6215-029, When the climate-control circuit commands 7802A348 airflow, the electric motor rotates the 7802A348 fan wheel inside the HVAC housing. Use 6215-029 when comparing this 7802A348 airflow configuration.
OE Reference and Application
The primary catalogue number is 7802A348. The recorded application is MITSUBISHI Outlander. For 6215-029, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6215-029 with the approved OE reference.
HVAC Interface and 7802A348 installation
During work on 6215-029, If 7802A348 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 7802A348 motor is the only cause. Recheck 6215-029 before the lower trim is closed.
For item 6215-029, confirm that the 7802A348 centrifugal wheel clears its housing and that the 6215-029 connector lock engages without force. After seating 6215-029, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6215-029.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 7802A348 |
| Cross-reference numbers | CSZ431D252 / 7800A519 |
| Vehicle brand | MITSUBISHI |
| Vehicle model | Outlander |
| Model year | Confirm by OE reference |
| 7802A348 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6215-029, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6215-029 record remains the picking reference.
For trade item 6215-029, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6215-029 on the packing instruction.
Frequently Asked Questions
How should item 6215-029 and blower number 7802A348 be verified?
Match 6215-029 to the complete 7802A348 marking, then compare the 6215-029 plug, terminal count, mounting flange and wheel dimensions with the removed MITSUBISHI unit.
Can 6215-029 have more than one vehicle-side blower configuration?
Yes. MITSUBISHI production changes can affect 6215-029; confirm steering position, climate-control specification and the original 6215-029 geometry before approval.
What circuit checks are useful when 6215-029 does not operate?
For 6215-029, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6215-029 motor again.
Which details should accompany a wholesale request for 6215-029?
Provide item 6215-029, OE 7802A348, the stated application, quantity and destination; add 6215-029 carton or private-label requirements separately.
How can noise be avoided after fitting 6215-029?
Clear debris from the air inlet, check that the 6215-029 wheel turns freely, seat the 6215-029 flange evenly and keep wiring away from the impeller.
Request a quote for 6215-029: Send 7802A348, the 6215-029 application and required quantity for a fitment and supply review.
