61140-30S52 Blower Motor for NISSAN
Primary OE reference: 61140-30S52
Cross-reference 1: 272200T400
Cross-reference 2: 272300M000
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN
Brand: NISSAN
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
61140-30S52 Automotive Blower Motor Overview
This listing links 61140-30S52 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6205-078, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6205-078 when comparing this 61140-30S52 airflow configuration.
OE Reference and Application
The primary catalogue number is 61140-30S52. The recorded application is NISSAN. For 6205-078, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6205-078 with the approved OE reference.
HVAC Interface and 61140-30S52 installation
During work on 6205-078, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 61140-30S52 installation. Recheck 6205-078 before the lower trim is closed.
For item 6205-078, confirm that the 61140-30S52 centrifugal wheel clears its housing and that the 6205-078 connector lock engages without force. After seating 6205-078, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-078.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 61140-30S52 |
| Cross-reference numbers | 272200T400 / 272300M000 |
| Vehicle brand | NISSAN |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 61140-30S52 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-078, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-078 record remains the picking reference.
For trade item 6205-078, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-078 on the packing instruction.
Frequently Asked Questions
How should item 6205-078 and blower number 61140-30S52 be verified?
Match 6205-078 to the complete 61140-30S52 marking, then compare the 6205-078 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-078 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-078; confirm steering position, climate-control specification and the original 6205-078 geometry before approval.
What circuit checks are useful when 6205-078 does not operate?
For 6205-078, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-078 motor again.
Which details should accompany a wholesale request for 6205-078?
Provide item 6205-078, OE 61140-30S52, the stated application, quantity and destination; add 6205-078 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-078?
Clear debris from the air inlet, check that the 6205-078 wheel turns freely, seat the 6205-078 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-078: Send 61140-30S52, the 6205-078 application and required quantity for a fitment and supply review.
