272269W100A128 Blower Motor for NISSAN
Primary OE reference: 272269W100A128
Cross-reference 1: RC530084
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN
Brand: NISSAN
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
272269W100A128 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 272269W100A128 for application-led sourcing.
For catalogue item 6205-076, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6205-076 when comparing this 272269W100A128 airflow configuration.
OE Reference and Application
The primary catalogue number is 272269W100A128. The recorded application is NISSAN. For 6205-076, Measure the 272269W100A128 wheel height and outer diameter, then compare the electrical socket and base contour with the 272269W100A128 product photos. Record 6205-076 with the approved OE reference.
HVAC Interface and 272269W100A128 installation
During work on 6205-076, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 272269W100A128 installation. Recheck 6205-076 before the lower trim is closed.
For item 6205-076, confirm that the 272269W100A128 centrifugal wheel clears its housing and that the 6205-076 connector lock engages without force. After seating 6205-076, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-076.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 272269W100A128 |
| Cross-reference numbers | RC530084 |
| Vehicle brand | NISSAN |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 272269W100A128 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-076, Packing preparation accounts for the 272269W100A128 motor weight and wheel shape to reduce movement inside the carton. The 6205-076 record remains the picking reference.
For trade item 6205-076, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6205-076 on the packing instruction.
Frequently Asked Questions
How should item 6205-076 and blower number 272269W100A128 be verified?
Match 6205-076 to the complete 272269W100A128 marking, then compare the 6205-076 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-076 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-076; confirm steering position, climate-control specification and the original 6205-076 geometry before approval.
What circuit checks are useful when 6205-076 does not operate?
For 6205-076, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-076 motor again.
Which details should accompany a wholesale request for 6205-076?
Provide item 6205-076, OE 272269W100A128, the stated application, quantity and destination; add 6205-076 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-076?
Clear debris from the air inlet, check that the 6205-076 wheel turns freely, seat the 6205-076 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-076: Send 272269W100A128, the 6205-076 application and required quantity for a fitment and supply review.
