FD-B0101A Blower Motor for FORD
Primary OE reference: FD-B0101A
Cross-reference 1: 01221
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD
Brand: FORD
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
FD-B0101A Automotive Blower Motor Overview
This listing links FD-B0101A with the supplied blower-motor geometry, connector and application information.
For catalogue item 6203-100, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-100 when comparing this FD-B0101A airflow configuration.
OE Reference and Application
The primary catalogue number is FD-B0101A. The recorded application is FORD. For 6203-100, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6203-100 with the approved OE reference.
HVAC Interface and FD-B0101A installation
During work on 6203-100, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after FD-B0101A installation. Recheck 6203-100 before the lower trim is closed.
For item 6203-100, confirm that the FD-B0101A centrifugal wheel clears its housing and that the 6203-100 connector lock engages without force. After seating 6203-100, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-100.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | FD-B0101A |
| Cross-reference numbers | 01221 |
| Vehicle brand | FORD |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| FD-B0101A installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-100, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-100 record remains the picking reference.
For trade item 6203-100, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6203-100 on the packing instruction.
Frequently Asked Questions
How should item 6203-100 and blower number FD-B0101A be verified?
Match 6203-100 to the complete FD-B0101A marking, then compare the 6203-100 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-100 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-100; confirm steering position, climate-control specification and the original 6203-100 geometry before approval.
What circuit checks are useful when 6203-100 does not operate?
For 6203-100, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-100 motor again.
Which details should accompany a wholesale request for 6203-100?
Provide item 6203-100, OE FD-B0101A, the stated application, quantity and destination; add 6203-100 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-100?
Clear debris from the air inlet, check that the 6203-100 wheel turns freely, seat the 6203-100 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-100: Send FD-B0101A, the 6203-100 application and required quantity for a fitment and supply review.
