272500-0411 Blower Motor for SUZUKI Wagon R
Primary OE reference: 272500-0411
Product type: Automotive HVAC Blower Motor
Applicable vehicle: SUZUKI Wagon R
Brand: SUZUKI
Model: Wagon R
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
272500-0411 Automotive Blower Motor Overview
Reference 272500-0411 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6205-064, the 272500-0411 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-064 when comparing this 272500-0411 airflow configuration.
OE Reference and Application
The primary catalogue number is 272500-0411. The recorded application is SUZUKI Wagon R. For 6205-064, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6205-064 with the approved OE reference.
HVAC Interface and 272500-0411 installation
During work on 6205-064, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-064 before the lower trim is closed.
For item 6205-064, confirm that the 272500-0411 centrifugal wheel clears its housing and that the 6205-064 connector lock engages without force. After seating 6205-064, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-064.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 272500-0411 |
| Cross-reference numbers | 272500-0411 |
| Vehicle brand | SUZUKI |
| Vehicle model | Wagon R |
| Model year | Confirm by OE reference |
| 272500-0411 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-064, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-064 record remains the picking reference.
For trade item 6205-064, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-064 on the packing instruction.
Frequently Asked Questions
How should item 6205-064 and blower number 272500-0411 be verified?
Match 6205-064 to the complete 272500-0411 marking, then compare the 6205-064 plug, terminal count, mounting flange and wheel dimensions with the removed SUZUKI unit.
Can 6205-064 have more than one vehicle-side blower configuration?
Yes. SUZUKI production changes can affect 6205-064; confirm steering position, climate-control specification and the original 6205-064 geometry before approval.
What circuit checks are useful when 6205-064 does not operate?
For 6205-064, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-064 motor again.
Which details should accompany a wholesale request for 6205-064?
Provide item 6205-064, OE 272500-0411, the stated application, quantity and destination; add 6205-064 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-064?
Clear debris from the air inlet, check that the 6205-064 wheel turns freely, seat the 6205-064 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-064: Send 272500-0411, the 6205-064 application and required quantity for a fitment and supply review.
