272258J001 Blower Motor for NISSAN Altima
Primary OE reference: 272258J001
Cross-reference 1: 272308J100
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Altima
Brand: NISSAN
Model: Altima
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
272258J001 Automotive Blower Motor Overview
YoonShan catalogues 272258J001 as an HVAC 272258J001 airflow component for workshops, distributors and export buyers.
For catalogue item 6205-053, When the climate-control circuit commands 272258J001 airflow, the electric motor rotates the 272258J001 fan wheel inside the HVAC housing. Use 6205-053 when comparing this 272258J001 airflow configuration.
OE Reference and Application
The primary catalogue number is 272258J001. The recorded application is NISSAN Altima. For 6205-053, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed NISSAN unit. Record 6205-053 with the approved OE reference.
HVAC Interface and 272258J001 installation
During work on 6205-053, If 272258J001 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 272258J001 motor is the only cause. Recheck 6205-053 before the lower trim is closed.
For item 6205-053, confirm that the 272258J001 centrifugal wheel clears its housing and that the 6205-053 connector lock engages without force. After seating 6205-053, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-053.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 272258J001 |
| Cross-reference numbers | 272308J100 |
| Vehicle brand | NISSAN |
| Vehicle model | Altima |
| Model year | Confirm by OE reference |
| 272258J001 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-053, Packing preparation accounts for the 272258J001 motor weight and wheel shape to reduce movement inside the carton. The 6205-053 record remains the picking reference.
For trade item 6205-053, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6205-053 on the packing instruction.
Frequently Asked Questions
How should item 6205-053 and blower number 272258J001 be verified?
Match 6205-053 to the complete 272258J001 marking, then compare the 6205-053 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-053 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-053; confirm steering position, climate-control specification and the original 6205-053 geometry before approval.
What circuit checks are useful when 6205-053 does not operate?
For 6205-053, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-053 motor again.
Which details should accompany a wholesale request for 6205-053?
Provide item 6205-053, OE 272258J001, the stated application, quantity and destination; add 6205-053 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-053?
Clear debris from the air inlet, check that the 6205-053 wheel turns freely, seat the 6205-053 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-053: Send 272258J001, the 6205-053 application and required quantity for a fitment and supply review.
