97113M0000 Blower Motor for HYUNDAI Accent
Primary OE reference: 97113M0000
Cross-reference 1: B30883-0700
Cross-reference 2: A0505031
Cross-reference 3: A1205170526
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HYUNDAI Accent
Brand: HYUNDAI
Model: Accent
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
97113M0000 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 97113M0000 together with the 97113M0000 product images and vehicle data on this page.
For catalogue item 6202-051, the 97113M0000 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6202-051 when comparing this 97113M0000 airflow configuration.
OE Reference and Application
The primary catalogue number is 97113M0000. The recorded application is HYUNDAI Accent. For 6202-051, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6202-051 with the approved OE reference.
HVAC Interface and 97113M0000 installation
During work on 6202-051, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6202-051 before the lower trim is closed.
For item 6202-051, confirm that the 97113M0000 centrifugal wheel clears its housing and that the 6202-051 connector lock engages without force. After seating 6202-051, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-051.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 97113M0000 |
| Cross-reference numbers | B30883-0700 / A0505031 / A1205170526 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | Confirm by OE reference |
| 97113M0000 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6202-051, Packing preparation accounts for the 97113M0000 motor weight and wheel shape to reduce movement inside the carton. The 6202-051 record remains the picking reference.
For trade item 6202-051, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6202-051 on the packing instruction.
Frequently Asked Questions
How should item 6202-051 and blower number 97113M0000 be verified?
Match 6202-051 to the complete 97113M0000 marking, then compare the 6202-051 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.
Can 6202-051 have more than one vehicle-side blower configuration?
Yes. HYUNDAI production changes can affect 6202-051; confirm steering position, climate-control specification and the original 6202-051 geometry before approval.
What circuit checks are useful when 6202-051 does not operate?
For 6202-051, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-051 motor again.
Which details should accompany a wholesale request for 6202-051?
Provide item 6202-051, OE 97113M0000, the stated application, quantity and destination; add 6202-051 carton or private-label requirements separately.
How can noise be avoided after fitting 6202-051?
Clear debris from the air inlet, check that the 6202-051 wheel turns freely, seat the 6202-051 flange evenly and keep wiring away from the impeller.
Request a quote for 6202-051: Send 97113M0000, the 6202-051 application and required quantity for a fitment and supply review.
