52495944 Blower Motor for BUICK LeSabre
Primary OE reference: 52495944
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK LeSabre
Brand: BUICK
Model: LeSabre
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
52495944 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 52495944 to support OE-number comparison before purchase.
For catalogue item 6208-075, Cabin 52495944 airflow depends on the 52495944 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6208-075 when comparing this 52495944 airflow configuration.
OE Reference and Application
The primary catalogue number is 52495944. The recorded application is BUICK LeSabre. For 6208-075, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6208-075 with the approved OE reference.
HVAC Interface and 52495944 installation
During work on 6208-075, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6208-075 before the lower trim is closed.
For item 6208-075, confirm that the 52495944 centrifugal wheel clears its housing and that the 6208-075 connector lock engages without force. After seating 6208-075, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-075.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 52495944 |
| Cross-reference numbers | 52495944 |
| Vehicle brand | BUICK |
| Vehicle model | LeSabre |
| Model year | Confirm by OE reference |
| 52495944 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-075, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-075 record remains the picking reference.
For trade item 6208-075, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6208-075 on the packing instruction.
Frequently Asked Questions
How should item 6208-075 and blower number 52495944 be verified?
Match 6208-075 to the complete 52495944 marking, then compare the 6208-075 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-075 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-075; confirm steering position, climate-control specification and the original 6208-075 geometry before approval.
What circuit checks are useful when 6208-075 does not operate?
For 6208-075, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-075 motor again.
Which details should accompany a wholesale request for 6208-075?
Provide item 6208-075, OE 52495944, the stated application, quantity and destination; add 6208-075 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-075?
Clear debris from the air inlet, check that the 6208-075 wheel turns freely, seat the 6208-075 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-075: Send 52495944, the 6208-075 application and required quantity for a fitment and supply review.
