52477160 Blower Motor for CHEVROLET Blazer
Primary OE reference: 52477160
Cross-reference 1: 52477225
Cross-reference 2: 2311776
Cross-reference 3: 700233
Cross-reference 4: BM0152C
Cross-reference 5: PM152
Product type: Automotive HVAC Blower Motor
Applicable vehicle: CHEVROLET Blazer
Brand: CHEVROLET
Model: Blazer
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
52477160 Automotive Blower Motor Overview
Reference 52477160 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6209-044, the 52477160 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6209-044 when comparing this 52477160 airflow configuration.
OE Reference and Application
The primary catalogue number is 52477160. The recorded application is CHEVROLET Blazer. For 6209-044, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6209-044 with the approved OE reference.
HVAC Interface and 52477160 installation
During work on 6209-044, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6209-044 before the lower trim is closed.
For item 6209-044, confirm that the 52477160 centrifugal wheel clears its housing and that the 6209-044 connector lock engages without force. After seating 6209-044, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6209-044.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 52477160 |
| Cross-reference numbers | 52477225 / 2311776 / 700233 / BM0152C / PM152 |
| Vehicle brand | CHEVROLET |
| Vehicle model | Blazer |
| Model year | Confirm by OE reference |
| 52477160 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6209-044, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6209-044 record remains the picking reference.
For trade item 6209-044, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6209-044 on the packing instruction.
Frequently Asked Questions
How should item 6209-044 and blower number 52477160 be verified?
Match 6209-044 to the complete 52477160 marking, then compare the 6209-044 plug, terminal count, mounting flange and wheel dimensions with the removed CHEVROLET unit.
Can 6209-044 have more than one vehicle-side blower configuration?
Yes. CHEVROLET production changes can affect 6209-044; confirm steering position, climate-control specification and the original 6209-044 geometry before approval.
What circuit checks are useful when 6209-044 does not operate?
For 6209-044, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6209-044 motor again.
Which details should accompany a wholesale request for 6209-044?
Provide item 6209-044, OE 52477160, the stated application, quantity and destination; add 6209-044 carton or private-label requirements separately.
How can noise be avoided after fitting 6209-044?
Clear debris from the air inlet, check that the 6209-044 wheel turns freely, seat the 6209-044 flange evenly and keep wiring away from the impeller.
Request a quote for 6209-044: Send 52477160, the 6209-044 application and required quantity for a fitment and supply review.
