72223AG06A Blower Motor for SUBARU Impreza
Primary OE reference: 72223AG06A
Cross-reference 1: 72223AJ01A
Cross-reference 2: 72223FJ000
Cross-reference 3: 72223AJ010
Cross-reference 4: 87103-42060
Cross-reference 5: 79220-SHJ-A01
Cross-reference 6: 8710302500
Cross-reference 7: TYC700202
Cross-reference 8: 8710302221
Cross-reference 9: 2727000760
Cross-reference 10: 8710302220
Product type: Automotive HVAC Blower Motor
Applicable vehicle: SUBARU Impreza
Brand: SUBARU
Model: Impreza
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
72223AG06A Automotive Blower Motor Overview
The 72223AG06A record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6210-013, When the climate-control circuit commands 72223AG06A airflow, the electric motor rotates the 72223AG06A fan wheel inside the HVAC housing. Use 6210-013 when comparing this 72223AG06A airflow configuration.
OE Reference and Application
The primary catalogue number is 72223AG06A. The recorded application is SUBARU Impreza. For 6210-013, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6210-013 with the approved OE reference.
HVAC Interface and 72223AG06A installation
During work on 6210-013, If 72223AG06A airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 72223AG06A motor is the only cause. Recheck 6210-013 before the lower trim is closed.
For item 6210-013, confirm that the 72223AG06A centrifugal wheel clears its housing and that the 6210-013 connector lock engages without force. After seating 6210-013, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-013.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 72223AG06A |
| Cross-reference numbers | 72223AJ01A / 72223FJ000 / 72223AJ010 / 87103-42060 / 79220-SHJ-A01 / 8710302500 / TYC700202 / 8710302221 / 2727000760 / 8710302220 |
| Vehicle brand | SUBARU |
| Vehicle model | Impreza |
| Model year | Confirm by OE reference |
| 72223AG06A installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6210-013, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6210-013 record remains the picking reference.
For trade item 6210-013, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6210-013 on the packing instruction.
Frequently Asked Questions
How should item 6210-013 and blower number 72223AG06A be verified?
Match 6210-013 to the complete 72223AG06A marking, then compare the 6210-013 plug, terminal count, mounting flange and wheel dimensions with the removed SUBARU unit.
Can 6210-013 have more than one vehicle-side blower configuration?
Yes. SUBARU production changes can affect 6210-013; confirm steering position, climate-control specification and the original 6210-013 geometry before approval.
What circuit checks are useful when 6210-013 does not operate?
For 6210-013, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-013 motor again.
Which details should accompany a wholesale request for 6210-013?
Provide item 6210-013, OE 72223AG06A, the stated application, quantity and destination; add 6210-013 carton or private-label requirements separately.
How can noise be avoided after fitting 6210-013?
Clear debris from the air inlet, check that the 6210-013 wheel turns freely, seat the 6210-013 flange evenly and keep wiring away from the impeller.
Request a quote for 6210-013: Send 72223AG06A, the 6210-013 application and required quantity for a fitment and supply review.
