BBP261B10 Blower Motor for MAZDA 3
Primary OE reference: BBP261B10
Cross-reference 1: 8727000860
Cross-reference 2: HB111BBP2-04
Cross-reference 3: 8727000861
Cross-reference 4: BFF4-61B10
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA 3
Brand: MAZDA
Model: 3
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
BBP261B10 Automotive Blower Motor Overview
This listing links BBP261B10 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6206-024, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6206-024 when comparing this BBP261B10 airflow configuration.
OE Reference and Application
The primary catalogue number is BBP261B10. The recorded application is MAZDA 3. For 6206-024, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6206-024 with the approved OE reference.
HVAC Interface and BBP261B10 installation
During work on 6206-024, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after BBP261B10 installation. Recheck 6206-024 before the lower trim is closed.
For item 6206-024, confirm that the BBP261B10 centrifugal wheel clears its housing and that the 6206-024 connector lock engages without force. After seating 6206-024, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-024.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | BBP261B10 |
| Cross-reference numbers | 8727000860 / HB111BBP2-04 / 8727000861 / BFF4-61B10 |
| Vehicle brand | MAZDA |
| Vehicle model | 3 |
| Model year | Confirm by OE reference |
| BBP261B10 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-024, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6206-024 record remains the picking reference.
For trade item 6206-024, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6206-024 on the packing instruction.
Frequently Asked Questions
How should item 6206-024 and blower number BBP261B10 be verified?
Match 6206-024 to the complete BBP261B10 marking, then compare the 6206-024 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-024 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-024; confirm steering position, climate-control specification and the original 6206-024 geometry before approval.
What circuit checks are useful when 6206-024 does not operate?
For 6206-024, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-024 motor again.
Which details should accompany a wholesale request for 6206-024?
Provide item 6206-024, OE BBP261B10, the stated application, quantity and destination; add 6206-024 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-024?
Clear debris from the air inlet, check that the 6206-024 wheel turns freely, seat the 6206-024 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-024: Send BBP261B10, the 6206-024 application and required quantity for a fitment and supply review.
