79310SHJA01 Blower Motor for HONDA Odyssey
Primary OE reference: 79310SHJA01
Cross-reference 1: 79310SJCA02
Cross-reference 2: 79310SJCA03
Cross-reference 3: PM9304
Cross-reference 4: 700192
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA Odyssey
Brand: HONDA
Model: Odyssey
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
79310SHJA01 Automotive Blower Motor Overview
Reference 79310SHJA01 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6207-051, the 79310SHJA01 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6207-051 when comparing this 79310SHJA01 airflow configuration.
OE Reference and Application
The primary catalogue number is 79310SHJA01. The recorded application is HONDA Odyssey. For 6207-051, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6207-051 with the approved OE reference.
HVAC Interface and 79310SHJA01 installation
During work on 6207-051, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6207-051 before the lower trim is closed.
For item 6207-051, confirm that the 79310SHJA01 centrifugal wheel clears its housing and that the 6207-051 connector lock engages without force. After seating 6207-051, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-051.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 79310SHJA01 |
| Cross-reference numbers | 79310SJCA02 / 79310SJCA03 / PM9304 / 700192 |
| Vehicle brand | HONDA |
| Vehicle model | Odyssey |
| Model year | Confirm by OE reference |
| 79310SHJA01 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-051, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6207-051 record remains the picking reference.
For trade item 6207-051, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6207-051 on the packing instruction.
Frequently Asked Questions
How should item 6207-051 and blower number 79310SHJA01 be verified?
Match 6207-051 to the complete 79310SHJA01 marking, then compare the 6207-051 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-051 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-051; confirm steering position, climate-control specification and the original 6207-051 geometry before approval.
What circuit checks are useful when 6207-051 does not operate?
For 6207-051, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-051 motor again.
Which details should accompany a wholesale request for 6207-051?
Provide item 6207-051, OE 79310SHJA01, the stated application, quantity and destination; add 6207-051 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-051?
Clear debris from the air inlet, check that the 6207-051 wheel turns freely, seat the 6207-051 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-051: Send 79310SHJA01, the 6207-051 application and required quantity for a fitment and supply review.
