CB657229 Blower Motor for NISSAN
Primary OE reference: CB657229
Cross-reference 1: 98165412
Cross-reference 2: 8981654120
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN
Brand: NISSAN
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
CB657229 Automotive Blower Motor Overview
This listing links CB657229 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6205-027, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6205-027 when comparing this CB657229 airflow configuration.
OE Reference and Application
The primary catalogue number is CB657229. The recorded application is NISSAN. For 6205-027, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6205-027 with the approved OE reference.
HVAC Interface and CB657229 installation
During work on 6205-027, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after CB657229 installation. Recheck 6205-027 before the lower trim is closed.
For item 6205-027, confirm that the CB657229 centrifugal wheel clears its housing and that the 6205-027 connector lock engages without force. After seating 6205-027, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-027.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | CB657229 |
| Cross-reference numbers | 98165412 / 8981654120 |
| Vehicle brand | NISSAN |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| CB657229 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-027, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-027 record remains the picking reference.
For trade item 6205-027, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-027 on the packing instruction.
Frequently Asked Questions
How should item 6205-027 and blower number CB657229 be verified?
Match 6205-027 to the complete CB657229 marking, then compare the 6205-027 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-027 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-027; confirm steering position, climate-control specification and the original 6205-027 geometry before approval.
What circuit checks are useful when 6205-027 does not operate?
For 6205-027, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-027 motor again.
Which details should accompany a wholesale request for 6205-027?
Provide item 6205-027, OE CB657229, the stated application, quantity and destination; add 6205-027 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-027?
Clear debris from the air inlet, check that the 6205-027 wheel turns freely, seat the 6205-027 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-027: Send CB657229, the 6205-027 application and required quantity for a fitment and supply review.
