GK3J-61-B10C Blower Motor for MAZDA 6
Primary OE reference: GK3J-61-B10C
Cross-reference 1: GKKF61-B10
Cross-reference 2: 939780D
Cross-reference 3: 615-58768
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA 6
Brand: MAZDA
Model: 6
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
GK3J-61-B10C Automotive Blower Motor Overview
Reference GK3J-61-B10C identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6206-017, the GK3J-61-B10C blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6206-017 when comparing this GK3J-61-B10C airflow configuration.
OE Reference and Application
The primary catalogue number is GK3J-61-B10C. The recorded application is MAZDA 6. For 6206-017, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6206-017 with the approved OE reference.
HVAC Interface and GK3J-61-B10C installation
During work on 6206-017, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6206-017 before the lower trim is closed.
For item 6206-017, confirm that the GK3J-61-B10C centrifugal wheel clears its housing and that the 6206-017 connector lock engages without force. After seating 6206-017, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-017.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | GK3J-61-B10C |
| Cross-reference numbers | GKKF61-B10 / 939780D / 615-58768 |
| Vehicle brand | MAZDA |
| Vehicle model | 6 |
| Model year | Confirm by OE reference |
| GK3J-61-B10C installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-017, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6206-017 record remains the picking reference.
For trade item 6206-017, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6206-017 on the packing instruction.
Frequently Asked Questions
How should item 6206-017 and blower number GK3J-61-B10C be verified?
Match 6206-017 to the complete GK3J-61-B10C marking, then compare the 6206-017 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-017 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-017; confirm steering position, climate-control specification and the original 6206-017 geometry before approval.
What circuit checks are useful when 6206-017 does not operate?
For 6206-017, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-017 motor again.
Which details should accompany a wholesale request for 6206-017?
Provide item 6206-017, OE GK3J-61-B10C, the stated application, quantity and destination; add 6206-017 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-017?
Clear debris from the air inlet, check that the 6206-017 wheel turns freely, seat the 6206-017 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-017: Send GK3J-61-B10C, the 6206-017 application and required quantity for a fitment and supply review.
