PM4106 Blower Motor for MAZDA 3
Primary OE reference: PM4106
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA 3
Brand: MAZDA
Model: 3
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
PM4106 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by PM4106 to support OE-number comparison before purchase.
For catalogue item 6206-016, Cabin PM4106 airflow depends on the PM4106 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6206-016 when comparing this PM4106 airflow configuration.
OE Reference and Application
The primary catalogue number is PM4106. The recorded application is MAZDA 3. For 6206-016, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6206-016 with the approved OE reference.
HVAC Interface and PM4106 installation
During work on 6206-016, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6206-016 before the lower trim is closed.
For item 6206-016, confirm that the PM4106 centrifugal wheel clears its housing and that the 6206-016 connector lock engages without force. After seating 6206-016, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-016.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | PM4106 |
| Cross-reference numbers | PM4106 |
| Vehicle brand | MAZDA |
| Vehicle model | 3 |
| Model year | Confirm by OE reference |
| PM4106 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-016, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6206-016 record remains the picking reference.
For trade item 6206-016, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6206-016 on the packing instruction.
Frequently Asked Questions
How should item 6206-016 and blower number PM4106 be verified?
Match 6206-016 to the complete PM4106 marking, then compare the 6206-016 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-016 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-016; confirm steering position, climate-control specification and the original 6206-016 geometry before approval.
What circuit checks are useful when 6206-016 does not operate?
For 6206-016, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-016 motor again.
Which details should accompany a wholesale request for 6206-016?
Provide item 6206-016, OE PM4106, the stated application, quantity and destination; add 6206-016 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-016?
Clear debris from the air inlet, check that the 6206-016 wheel turns freely, seat the 6206-016 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-016: Send PM4106, the 6206-016 application and required quantity for a fitment and supply review.
