79310-SFJ-W01 Blower Motor for HONDA Odyssey
Primary OE reference: 79310-SFJ-W01
Cross-reference 1: 194000-1770
Cross-reference 2: 79310SEAG41
Cross-reference 3: PM4076
Cross-reference 4: LFH23BB
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA Odyssey
Brand: HONDA
Model: Odyssey
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
79310-SFJ-W01 Automotive Blower Motor Overview
This product entry documents the 79310-SFJ-W01 blower unit with practical identification and 79310-SFJ-W01 installation checkpoints.
For catalogue item 6207-031, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 79310-SFJ-W01 blower important at idle and in traffic. Use 6207-031 when comparing this 79310-SFJ-W01 airflow configuration.
OE Reference and Application
The primary catalogue number is 79310-SFJ-W01. The recorded application is HONDA Odyssey. For 6207-031, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6207-031 with the approved OE reference.
HVAC Interface and 79310-SFJ-W01 installation
During work on 6207-031, After 79310-SFJ-W01 installation, operate low through high speed and confirm 79310-SFJ-W01 airflow reaches the selected vents without abnormal vibration. Recheck 6207-031 before the lower trim is closed.
For item 6207-031, confirm that the 79310-SFJ-W01 centrifugal wheel clears its housing and that the 6207-031 connector lock engages without force. After seating 6207-031, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-031.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 79310-SFJ-W01 |
| Cross-reference numbers | 194000-1770 / 79310SEAG41 / PM4076 / LFH23BB |
| Vehicle brand | HONDA |
| Vehicle model | Odyssey |
| Model year | Confirm by OE reference |
| 79310-SFJ-W01 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-031, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6207-031 record remains the picking reference.
For trade item 6207-031, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6207-031 on the packing instruction.
Frequently Asked Questions
How should item 6207-031 and blower number 79310-SFJ-W01 be verified?
Match 6207-031 to the complete 79310-SFJ-W01 marking, then compare the 6207-031 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-031 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-031; confirm steering position, climate-control specification and the original 6207-031 geometry before approval.
What circuit checks are useful when 6207-031 does not operate?
For 6207-031, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-031 motor again.
Which details should accompany a wholesale request for 6207-031?
Provide item 6207-031, OE 79310-SFJ-W01, the stated application, quantity and destination; add 6207-031 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-031?
Clear debris from the air inlet, check that the 6207-031 wheel turns freely, seat the 6207-031 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-031: Send 79310-SFJ-W01, the 6207-031 application and required quantity for a fitment and supply review.
