27200-8J010 Blower Motor for NISSAN Altima
Primary OE reference: 27200-8J010
Cross-reference 1: 27230-8J000
Cross-reference 2: 27225-8J000
Cross-reference 3: PM9250
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Altima
Brand: NISSAN
Model: Altima
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Do not energize the unit while loose in the housing; secure it correctly before performing the functional check.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27200-8J010 Automotive Blower Motor Overview
Use 27200-8J010 as the initial catalogue reference for the pictured cabin blower motor, then confirm the physical interfaces.
For catalogue item 6205-061, Cabin 27200-8J010 airflow depends on the 27200-8J010 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6205-061 when comparing this 27200-8J010 airflow configuration.
OE Reference and Application
The primary catalogue number is 27200-8J010. The recorded application is NISSAN Altima. For 6205-061, Review the original connector photograph and fastening layout when catalogue applications include more than one HVAC configuration. Record 6205-061 with the approved OE reference.
HVAC Interface and 27200-8J010 installation
During work on 6205-061, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6205-061 before the lower trim is closed.
For item 6205-061, confirm that the 27200-8J010 centrifugal wheel clears its housing and that the 6205-061 connector lock engages without force. After seating 6205-061, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-061.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27200-8J010 |
| Cross-reference numbers | 27230-8J000 / 27225-8J000 / PM9250 |
| Vehicle brand | NISSAN |
| Vehicle model | Altima |
| Model year | Confirm by OE reference |
| 27200-8J010 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-061, Packing preparation accounts for the 27200-8J010 motor weight and wheel shape to reduce movement inside the carton. The 6205-061 record remains the picking reference.
For trade item 6205-061, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6205-061 on the packing instruction.
Frequently Asked Questions
How should item 6205-061 and blower number 27200-8J010 be verified?
Match 6205-061 to the complete 27200-8J010 marking, then compare the 6205-061 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-061 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-061; confirm steering position, climate-control specification and the original 6205-061 geometry before approval.
What circuit checks are useful when 6205-061 does not operate?
For 6205-061, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-061 motor again.
Which details should accompany a wholesale request for 6205-061?
Provide item 6205-061, OE 27200-8J010, the stated application, quantity and destination; add 6205-061 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-061?
Clear debris from the air inlet, check that the 6205-061 wheel turns freely, seat the 6205-061 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-061: Send 27200-8J010, the 6205-061 application and required quantity for a fitment and supply review.
