27220-01G03 Blower Motor for NISSAN D21
Primary OE reference: 27220-01G03
Cross-reference 1: 40103-M
Cross-reference 2: TYC700111
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN D21
Brand: NISSAN
Model: D21
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27220-01G03 Automotive Blower Motor Overview
YoonShan catalogues 27220-01G03 as an HVAC 27220-01G03 airflow component for workshops, distributors and export buyers.
For catalogue item 6205-036, When the climate-control circuit commands 27220-01G03 airflow, the electric motor rotates the 27220-01G03 fan wheel inside the HVAC housing. Use 6205-036 when comparing this 27220-01G03 airflow configuration.
OE Reference and Application
The primary catalogue number is 27220-01G03. The recorded application is NISSAN D21. For 6205-036, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed NISSAN unit. Record 6205-036 with the approved OE reference.
HVAC Interface and 27220-01G03 installation
During work on 6205-036, If 27220-01G03 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 27220-01G03 motor is the only cause. Recheck 6205-036 before the lower trim is closed.
For item 6205-036, confirm that the 27220-01G03 centrifugal wheel clears its housing and that the 6205-036 connector lock engages without force. After seating 6205-036, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-036.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27220-01G03 |
| Cross-reference numbers | 40103-M / TYC700111 |
| Vehicle brand | NISSAN |
| Vehicle model | D21 |
| Model year | Confirm by OE reference |
| 27220-01G03 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-036, Packing preparation accounts for the 27220-01G03 motor weight and wheel shape to reduce movement inside the carton. The 6205-036 record remains the picking reference.
For trade item 6205-036, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6205-036 on the packing instruction.
Frequently Asked Questions
How should item 6205-036 and blower number 27220-01G03 be verified?
Match 6205-036 to the complete 27220-01G03 marking, then compare the 6205-036 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-036 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-036; confirm steering position, climate-control specification and the original 6205-036 geometry before approval.
What circuit checks are useful when 6205-036 does not operate?
For 6205-036, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-036 motor again.
Which details should accompany a wholesale request for 6205-036?
Provide item 6205-036, OE 27220-01G03, the stated application, quantity and destination; add 6205-036 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-036?
Clear debris from the air inlet, check that the 6205-036 wheel turns freely, seat the 6205-036 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-036: Send 27220-01G03, the 6205-036 application and required quantity for a fitment and supply review.
