87103-30390 Blower Motor for LEXUS GS 300
Primary OE reference: 87103-30390
Cross-reference 1: 87103-30370
Cross-reference 2: 194000-7182
Cross-reference 3: 8710348020
Cross-reference 4: TO3126115
Product type: Automotive HVAC Blower Motor
Applicable vehicle: LEXUS GS 300
Brand: LEXUS
Model: GS 300
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
87103-30390 Automotive Blower Motor Overview
Reference 87103-30390 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6228-003, the 87103-30390 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6228-003 when comparing this 87103-30390 airflow configuration.
OE Reference and Application
The primary catalogue number is 87103-30390. The recorded application is LEXUS GS 300. For 6228-003, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6228-003 with the approved OE reference.
HVAC Interface and 87103-30390 installation
During work on 6228-003, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6228-003 before the lower trim is closed.
For item 6228-003, confirm that the 87103-30390 centrifugal wheel clears its housing and that the 6228-003 connector lock engages without force. After seating 6228-003, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6228-003.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 87103-30390 |
| Cross-reference numbers | 87103-30370 / 194000-7182 / 8710348020 / TO3126115 |
| Vehicle brand | LEXUS |
| Vehicle model | GS 300 |
| Model year | Confirm by OE reference |
| 87103-30390 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6228-003, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6228-003 record remains the picking reference.
For trade item 6228-003, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6228-003 on the packing instruction.
Frequently Asked Questions
How should item 6228-003 and blower number 87103-30390 be verified?
Match 6228-003 to the complete 87103-30390 marking, then compare the 6228-003 plug, terminal count, mounting flange and wheel dimensions with the removed LEXUS unit.
Can 6228-003 have more than one vehicle-side blower configuration?
Yes. LEXUS production changes can affect 6228-003; confirm steering position, climate-control specification and the original 6228-003 geometry before approval.
What circuit checks are useful when 6228-003 does not operate?
For 6228-003, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6228-003 motor again.
Which details should accompany a wholesale request for 6228-003?
Provide item 6228-003, OE 87103-30390, the stated application, quantity and destination; add 6228-003 carton or private-label requirements separately.
How can noise be avoided after fitting 6228-003?
Clear debris from the air inlet, check that the 6228-003 wheel turns freely, seat the 6228-003 flange evenly and keep wiring away from the impeller.
Request a quote for 6228-003: Send 87103-30390, the 6228-003 application and required quantity for a fitment and supply review.
