5015866AA Blower Motor for JEEP Grand Cherokee
Primary OE reference: 5015866AA
Cross-reference 1: TYC700010
Cross-reference 2: PM3905
Cross-reference 3: 15-80116
Cross-reference 4: 10030
Cross-reference 5: 16241184-101
Cross-reference 6: 16241184-102
Cross-reference 7: 700010
Product type: Automotive HVAC Blower Motor
Applicable vehicle: JEEP Grand Cherokee
Brand: JEEP
Model: Grand Cherokee
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
5015866AA Automotive Blower Motor Overview
Reference 5015866AA identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6208-047, the 5015866AA blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6208-047 when comparing this 5015866AA airflow configuration.
OE Reference and Application
The primary catalogue number is 5015866AA. The recorded application is JEEP Grand Cherokee. For 6208-047, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6208-047 with the approved OE reference.
HVAC Interface and 5015866AA installation
During work on 6208-047, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6208-047 before the lower trim is closed.
For item 6208-047, confirm that the 5015866AA centrifugal wheel clears its housing and that the 6208-047 connector lock engages without force. After seating 6208-047, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-047.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 5015866AA |
| Cross-reference numbers | TYC700010 / PM3905 / 15-80116 / 10030 / 16241184-101 / 16241184-102 / 700010 |
| Vehicle brand | JEEP |
| Vehicle model | Grand Cherokee |
| Model year | Confirm by OE reference |
| 5015866AA installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-047, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6208-047 record remains the picking reference.
For trade item 6208-047, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6208-047 on the packing instruction.
Frequently Asked Questions
How should item 6208-047 and blower number 5015866AA be verified?
Match 6208-047 to the complete 5015866AA marking, then compare the 6208-047 plug, terminal count, mounting flange and wheel dimensions with the removed JEEP unit.
Can 6208-047 have more than one vehicle-side blower configuration?
Yes. JEEP production changes can affect 6208-047; confirm steering position, climate-control specification and the original 6208-047 geometry before approval.
What circuit checks are useful when 6208-047 does not operate?
For 6208-047, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-047 motor again.
Which details should accompany a wholesale request for 6208-047?
Provide item 6208-047, OE 5015866AA, the stated application, quantity and destination; add 6208-047 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-047?
Clear debris from the air inlet, check that the 6208-047 wheel turns freely, seat the 6208-047 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-047: Send 5015866AA, the 6208-047 application and required quantity for a fitment and supply review.
