3M5H-18456-AD Blower Motor for FORD C-Max
Primary OE reference: 3M5H-18456-AD
Cross-reference 1: AV6N-18456-CA
Cross-reference 2: 3M5H-18456-EC
Cross-reference 3: 8EW351150-651
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD C-Max
Brand: FORD
Model: C-Max
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
3M5H-18456-AD Automotive Blower Motor Overview
This product entry documents the 3M5H-18456-AD blower unit with practical identification and 3M5H-18456-AD installation checkpoints.
For catalogue item 6203-026, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 3M5H-18456-AD blower important at idle and in traffic. Use 6203-026 when comparing this 3M5H-18456-AD airflow configuration.
OE Reference and Application
The primary catalogue number is 3M5H-18456-AD. The recorded application is FORD C-Max. For 6203-026, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6203-026 with the approved OE reference.
HVAC Interface and 3M5H-18456-AD installation
During work on 6203-026, After 3M5H-18456-AD installation, operate low through high speed and confirm 3M5H-18456-AD airflow reaches the selected vents without abnormal vibration. Recheck 6203-026 before the lower trim is closed.
For item 6203-026, confirm that the 3M5H-18456-AD centrifugal wheel clears its housing and that the 6203-026 connector lock engages without force. After seating 6203-026, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-026.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 3M5H-18456-AD |
| Cross-reference numbers | AV6N-18456-CA / 3M5H-18456-EC / 8EW351150-651 |
| Vehicle brand | FORD |
| Vehicle model | C-Max |
| Model year | Confirm by OE reference |
| 3M5H-18456-AD installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-026, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-026 record remains the picking reference.
For trade item 6203-026, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6203-026 on the packing instruction.
Frequently Asked Questions
How should item 6203-026 and blower number 3M5H-18456-AD be verified?
Match 6203-026 to the complete 3M5H-18456-AD marking, then compare the 6203-026 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-026 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-026; confirm steering position, climate-control specification and the original 6203-026 geometry before approval.
What circuit checks are useful when 6203-026 does not operate?
For 6203-026, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-026 motor again.
Which details should accompany a wholesale request for 6203-026?
Provide item 6203-026, OE 3M5H-18456-AD, the stated application, quantity and destination; add 6203-026 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-026?
Clear debris from the air inlet, check that the 6203-026 wheel turns freely, seat the 6203-026 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-026: Send 3M5H-18456-AD, the 6203-026 application and required quantity for a fitment and supply review.
