6411.S6 Blower Motor for PEUGEOT
Primary OE reference: 6411.S6
Product type: Automotive HVAC Blower Motor
Applicable vehicle: PEUGEOT
Brand: PEUGEOT
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
6411.S6 Automotive Blower Motor Overview
The 6411.S6 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6204-045, When the climate-control circuit commands 6411.S6 airflow, the electric motor rotates the 6411.S6 fan wheel inside the HVAC housing. Use 6204-045 when comparing this 6411.S6 airflow configuration.
OE Reference and Application
The primary catalogue number is 6411.S6. The recorded application is PEUGEOT. For 6204-045, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6204-045 with the approved OE reference.
HVAC Interface and 6411.S6 installation
During work on 6204-045, If 6411.S6 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 6411.S6 motor is the only cause. Recheck 6204-045 before the lower trim is closed.
For item 6204-045, confirm that the 6411.S6 centrifugal wheel clears its housing and that the 6204-045 connector lock engages without force. After seating 6204-045, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-045.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 6411.S6 |
| Cross-reference numbers | 6411.S6 |
| Vehicle brand | PEUGEOT |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 6411.S6 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6204-045, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6204-045 record remains the picking reference.
For trade item 6204-045, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6204-045 on the packing instruction.
Frequently Asked Questions
How should item 6204-045 and blower number 6411.S6 be verified?
Match 6204-045 to the complete 6411.S6 marking, then compare the 6204-045 plug, terminal count, mounting flange and wheel dimensions with the removed PEUGEOT unit.
Can 6204-045 have more than one vehicle-side blower configuration?
Yes. PEUGEOT production changes can affect 6204-045; confirm steering position, climate-control specification and the original 6204-045 geometry before approval.
What circuit checks are useful when 6204-045 does not operate?
For 6204-045, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-045 motor again.
Which details should accompany a wholesale request for 6204-045?
Provide item 6204-045, OE 6411.S6, the stated application, quantity and destination; add 6204-045 carton or private-label requirements separately.
How can noise be avoided after fitting 6204-045?
Clear debris from the air inlet, check that the 6204-045 wheel turns freely, seat the 6204-045 flange evenly and keep wiring away from the impeller.
Request a quote for 6204-045: Send 6411.S6, the 6204-045 application and required quantity for a fitment and supply review.
