7H0819021A Blower Motor for AUDI Q7
Primary OE reference: 7H0819021A
Cross-reference 1: 134332156
Cross-reference 2: 7H0819021
Cross-reference 3: 264880
Cross-reference 4: 95557206100
Cross-reference 5: 95557206101
Cross-reference 6: 7E0819021A
Product type: Automotive HVAC Blower Motor
Applicable vehicle: AUDI Q7
Brand: AUDI
Model: Q7
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
7H0819021A Automotive Blower Motor Overview
Reference 7H0819021A identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6233-026, the 7H0819021A blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6233-026 when comparing this 7H0819021A airflow configuration.
OE Reference and Application
The primary catalogue number is 7H0819021A. The recorded application is AUDI Q7. For 6233-026, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6233-026 with the approved OE reference.
HVAC Interface and 7H0819021A installation
During work on 6233-026, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6233-026 before the lower trim is closed.
For item 6233-026, confirm that the 7H0819021A centrifugal wheel clears its housing and that the 6233-026 connector lock engages without force. After seating 6233-026, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6233-026.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 7H0819021A |
| Cross-reference numbers | 134332156 / 7H0819021 / 264880 / 95557206100 / 95557206101 / 7E0819021A |
| Vehicle brand | AUDI |
| Vehicle model | Q7 |
| Model year | Confirm by OE reference |
| 7H0819021A installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6233-026, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6233-026 record remains the picking reference.
For trade item 6233-026, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6233-026 on the packing instruction.
Frequently Asked Questions
How should item 6233-026 and blower number 7H0819021A be verified?
Match 6233-026 to the complete 7H0819021A marking, then compare the 6233-026 plug, terminal count, mounting flange and wheel dimensions with the removed AUDI unit.
Can 6233-026 have more than one vehicle-side blower configuration?
Yes. AUDI production changes can affect 6233-026; confirm steering position, climate-control specification and the original 6233-026 geometry before approval.
What circuit checks are useful when 6233-026 does not operate?
For 6233-026, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6233-026 motor again.
Which details should accompany a wholesale request for 6233-026?
Provide item 6233-026, OE 7H0819021A, the stated application, quantity and destination; add 6233-026 carton or private-label requirements separately.
How can noise be avoided after fitting 6233-026?
Clear debris from the air inlet, check that the 6233-026 wheel turns freely, seat the 6233-026 flange evenly and keep wiring away from the impeller.
Request a quote for 6233-026: Send 7H0819021A, the 6233-026 application and required quantity for a fitment and supply review.
