PM141 Blower Motor for BUICK Electra
Primary OE reference: PM141
Cross-reference 1: 35337
Cross-reference 2: BM0141C
Cross-reference 3: 100032
Cross-reference 4: 11337
Cross-reference 5: 1800136
Cross-reference 6: 2311257
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK Electra
Brand: BUICK
Model: Electra
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
PM141 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by PM141 to support OE-number comparison before purchase.
For catalogue item 6208-057, Cabin PM141 airflow depends on the PM141 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6208-057 when comparing this PM141 airflow configuration.
OE Reference and Application
The primary catalogue number is PM141. The recorded application is BUICK Electra. For 6208-057, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6208-057 with the approved OE reference.
HVAC Interface and PM141 installation
During work on 6208-057, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6208-057 before the lower trim is closed.
For item 6208-057, confirm that the PM141 centrifugal wheel clears its housing and that the 6208-057 connector lock engages without force. After seating 6208-057, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-057.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | PM141 |
| Cross-reference numbers | 35337 / BM0141C / 100032 / 11337 / 1800136 / 2311257 |
| Vehicle brand | BUICK |
| Vehicle model | Electra |
| Model year | Confirm by OE reference |
| PM141 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-057, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6208-057 record remains the picking reference.
For trade item 6208-057, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6208-057 on the packing instruction.
Frequently Asked Questions
How should item 6208-057 and blower number PM141 be verified?
Match 6208-057 to the complete PM141 marking, then compare the 6208-057 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-057 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-057; confirm steering position, climate-control specification and the original 6208-057 geometry before approval.
What circuit checks are useful when 6208-057 does not operate?
For 6208-057, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-057 motor again.
Which details should accompany a wholesale request for 6208-057?
Provide item 6208-057, OE PM141, the stated application, quantity and destination; add 6208-057 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-057?
Clear debris from the air inlet, check that the 6208-057 wheel turns freely, seat the 6208-057 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-057: Send PM141, the 6208-057 application and required quantity for a fitment and supply review.
