52402368 Blower Motor for CHEVROLET Meriva
Primary OE reference: 52402368
Cross-reference 1: RC.530.075
Cross-reference 2: 7733006119
Cross-reference 3: 22081401
Cross-reference 4: 92285
Cross-reference 5: GE4368
Product type: Automotive HVAC Blower Motor
Applicable vehicle: CHEVROLET Meriva
Brand: CHEVROLET
Model: Meriva
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
52402368 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 52402368 for application-led sourcing.
For catalogue item 6208-043, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6208-043 when comparing this 52402368 airflow configuration.
OE Reference and Application
The primary catalogue number is 52402368. The recorded application is CHEVROLET Meriva. For 6208-043, Measure the 52402368 wheel height and outer diameter, then compare the electrical socket and base contour with the 52402368 product photos. Record 6208-043 with the approved OE reference.
HVAC Interface and 52402368 installation
During work on 6208-043, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 52402368 installation. Recheck 6208-043 before the lower trim is closed.
For item 6208-043, confirm that the 52402368 centrifugal wheel clears its housing and that the 6208-043 connector lock engages without force. After seating 6208-043, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-043.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 52402368 |
| Cross-reference numbers | RC.530.075 / 7733006119 / 22081401 / 92285 / GE4368 |
| Vehicle brand | CHEVROLET |
| Vehicle model | Meriva |
| Model year | Confirm by OE reference |
| 52402368 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-043, Packing preparation accounts for the 52402368 motor weight and wheel shape to reduce movement inside the carton. The 6208-043 record remains the picking reference.
For trade item 6208-043, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6208-043 on the packing instruction.
Frequently Asked Questions
How should item 6208-043 and blower number 52402368 be verified?
Match 6208-043 to the complete 52402368 marking, then compare the 6208-043 plug, terminal count, mounting flange and wheel dimensions with the removed CHEVROLET unit.
Can 6208-043 have more than one vehicle-side blower configuration?
Yes. CHEVROLET production changes can affect 6208-043; confirm steering position, climate-control specification and the original 6208-043 geometry before approval.
What circuit checks are useful when 6208-043 does not operate?
For 6208-043, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-043 motor again.
Which details should accompany a wholesale request for 6208-043?
Provide item 6208-043, OE 52402368, the stated application, quantity and destination; add 6208-043 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-043?
Clear debris from the air inlet, check that the 6208-043 wheel turns freely, seat the 6208-043 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-043: Send 52402368, the 6208-043 application and required quantity for a fitment and supply review.
