AR3Z19805B Blower Motor for FORD Mustang
Primary OE reference: AR3Z19805B
Cross-reference 1: 700273
Cross-reference 2: 75870
Cross-reference 3: AR3Z19805A
Cross-reference 4: TYC700273
Cross-reference 5: BM9396C
Cross-reference 6: 7C3Z19805B
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD Mustang
Brand: FORD
Model: Mustang
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
AR3Z19805B Automotive Blower Motor Overview
The AR3Z19805B record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6203-057, When the climate-control circuit commands AR3Z19805B airflow, the electric motor rotates the AR3Z19805B fan wheel inside the HVAC housing. Use 6203-057 when comparing this AR3Z19805B airflow configuration.
OE Reference and Application
The primary catalogue number is AR3Z19805B. The recorded application is FORD Mustang. For 6203-057, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6203-057 with the approved OE reference.
HVAC Interface and AR3Z19805B installation
During work on 6203-057, If AR3Z19805B airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the AR3Z19805B motor is the only cause. Recheck 6203-057 before the lower trim is closed.
For item 6203-057, confirm that the AR3Z19805B centrifugal wheel clears its housing and that the 6203-057 connector lock engages without force. After seating 6203-057, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-057.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | AR3Z19805B |
| Cross-reference numbers | 700273 / 75870 / AR3Z19805A / TYC700273 / BM9396C / 7C3Z19805B |
| Vehicle brand | FORD |
| Vehicle model | Mustang |
| Model year | Confirm by OE reference |
| AR3Z19805B installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-057, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-057 record remains the picking reference.
For trade item 6203-057, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6203-057 on the packing instruction.
Frequently Asked Questions
How should item 6203-057 and blower number AR3Z19805B be verified?
Match 6203-057 to the complete AR3Z19805B marking, then compare the 6203-057 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-057 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-057; confirm steering position, climate-control specification and the original 6203-057 geometry before approval.
What circuit checks are useful when 6203-057 does not operate?
For 6203-057, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-057 motor again.
Which details should accompany a wholesale request for 6203-057?
Provide item 6203-057, OE AR3Z19805B, the stated application, quantity and destination; add 6203-057 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-057?
Clear debris from the air inlet, check that the 6203-057 wheel turns freely, seat the 6203-057 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-057: Send AR3Z19805B, the 6203-057 application and required quantity for a fitment and supply review.
