79310-SMG-G41 Blower Motor for HONDA Civic
Primary OE reference: 79310-SMG-G41
Cross-reference 1: 34256
Cross-reference 2: DD4008TT
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA Civic
Brand: HONDA
Model: Civic
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
79310-SMG-G41 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 79310-SMG-G41 to support OE-number comparison before purchase.
For catalogue item 6207-043, Cabin 79310-SMG-G41 airflow depends on the 79310-SMG-G41 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6207-043 when comparing this 79310-SMG-G41 airflow configuration.
OE Reference and Application
The primary catalogue number is 79310-SMG-G41. The recorded application is HONDA Civic. For 6207-043, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6207-043 with the approved OE reference.
HVAC Interface and 79310-SMG-G41 installation
During work on 6207-043, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6207-043 before the lower trim is closed.
For item 6207-043, confirm that the 79310-SMG-G41 centrifugal wheel clears its housing and that the 6207-043 connector lock engages without force. After seating 6207-043, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-043.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 79310-SMG-G41 |
| Cross-reference numbers | 34256 / DD4008TT |
| Vehicle brand | HONDA |
| Vehicle model | Civic |
| Model year | Confirm by OE reference |
| 79310-SMG-G41 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-043, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6207-043 record remains the picking reference.
For trade item 6207-043, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6207-043 on the packing instruction.
Frequently Asked Questions
How should item 6207-043 and blower number 79310-SMG-G41 be verified?
Match 6207-043 to the complete 79310-SMG-G41 marking, then compare the 6207-043 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-043 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-043; confirm steering position, climate-control specification and the original 6207-043 geometry before approval.
What circuit checks are useful when 6207-043 does not operate?
For 6207-043, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-043 motor again.
Which details should accompany a wholesale request for 6207-043?
Provide item 6207-043, OE 79310-SMG-G41, the stated application, quantity and destination; add 6207-043 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-043?
Clear debris from the air inlet, check that the 6207-043 wheel turns freely, seat the 6207-043 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-043: Send 79310-SMG-G41, the 6207-043 application and required quantity for a fitment and supply review.
