6441.V2 Blower Motor for PEUGEOT 107
Primary OE reference: 6441.V2
Cross-reference 1: 87103-0H030
Cross-reference 2: 715069
Cross-reference 3: 1608175880
Cross-reference 4: 87352
Cross-reference 5: 34273
Cross-reference 6: 871030H031
Product type: Automotive HVAC Blower Motor
Applicable vehicle: PEUGEOT 107
Brand: PEUGEOT
Model: 107
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
6441.V2 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 6441.V2 for application-led sourcing.
For catalogue item 6204-055, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6204-055 when comparing this 6441.V2 airflow configuration.
OE Reference and Application
The primary catalogue number is 6441.V2. The recorded application is PEUGEOT 107. For 6204-055, Measure the 6441.V2 wheel height and outer diameter, then compare the electrical socket and base contour with the 6441.V2 product photos. Record 6204-055 with the approved OE reference.
HVAC Interface and 6441.V2 installation
During work on 6204-055, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 6441.V2 installation. Recheck 6204-055 before the lower trim is closed.
For item 6204-055, confirm that the 6441.V2 centrifugal wheel clears its housing and that the 6204-055 connector lock engages without force. After seating 6204-055, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-055.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 6441.V2 |
| Cross-reference numbers | 87103-0H030 / 715069 / 1608175880 / 87352 / 34273 / 871030H031 |
| Vehicle brand | PEUGEOT |
| Vehicle model | 107 |
| Model year | Confirm by OE reference |
| 6441.V2 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6204-055, Packing preparation accounts for the 6441.V2 motor weight and wheel shape to reduce movement inside the carton. The 6204-055 record remains the picking reference.
For trade item 6204-055, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6204-055 on the packing instruction.
Frequently Asked Questions
How should item 6204-055 and blower number 6441.V2 be verified?
Match 6204-055 to the complete 6441.V2 marking, then compare the 6204-055 plug, terminal count, mounting flange and wheel dimensions with the removed PEUGEOT unit.
Can 6204-055 have more than one vehicle-side blower configuration?
Yes. PEUGEOT production changes can affect 6204-055; confirm steering position, climate-control specification and the original 6204-055 geometry before approval.
What circuit checks are useful when 6204-055 does not operate?
For 6204-055, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-055 motor again.
Which details should accompany a wholesale request for 6204-055?
Provide item 6204-055, OE 6441.V2, the stated application, quantity and destination; add 6204-055 carton or private-label requirements separately.
How can noise be avoided after fitting 6204-055?
Clear debris from the air inlet, check that the 6204-055 wheel turns freely, seat the 6204-055 flange evenly and keep wiring away from the impeller.
Request a quote for 6204-055: Send 6441.V2, the 6204-055 application and required quantity for a fitment and supply review.
